Scientific Articles

Following you will find a list of scientific articles published by means of our laser lithography technology.

You can export this list by clicking 'Save as PDF' below:


Coupled Whispering Gallery Mode Resonators via Template-Assisted Assembly of Photoluminescent Microspheres
Smith, M. J., Zeng, Q., Lafalce, E., Yu, S., Zhang, S., Vardeny, Z. V., Tsukruk, V. V.
Advanced Functional Materials, 2019, DOI: 10.1002/adfm.201902520

A clear solution: semiconductor nanocrystals as photoinitiators in solvent free polymerization
Verbitsky, L., Waiskopf, N., Magdassi, S., Banin, U.
Nanoscale, 2019, DOI: 10.1039/C9NR03086G

Metrological studies of limited angle holographic tomography systems based on a phase phantom mimicking biological cell
Kujawinska, M., Ziemczonok, M., Kus, A., Krauze, W.
Digital Holography and Three-Dimensional Imaging 2019
, OSA Technical Digest, paper Th2B2.2

Translational and rotational manipulation of filamentous cells using optically driven microrobots
Hu, S., Hu, R., Dong, X., Wei, T., Chen, S., Sun, D.
Opt. Express 27
, 2019, DOI: 10.1364/OE.27.016475

Osteogenic cells differentiation on topological surfaces under ultrasound stimulation
Paun, I. A., Calin, B. S., Mustaciosu, C. C., Mihailescu, M., Popovici, C. S., Luculescu, C. R.
Journal of Materials Science, 2019, DOI: 10.1007/s10853-019-03680-9

Magnetically actuated microrobots as a platform for stem cell transplantation
Jeon, S., Kim, S., Ha, S., Lee, S., Kim, E., Kim, S. Y., Park, S. H., Jeon, J. H., Kim, S. W., Moon, C., Nelson, B. J., Kim, J.-Y., Yu, S.-W., Choi, H.
Science Robotics, 2019, DOI: 10.1126/scirobotics.aav4317

Microscaffolds by Direct Laser Writing for Neurite Guidance Leading to Tailor-Made Neuronal Networks
Fendler, C., Denker, C., Harberts, J., Bayat, P., Zierold, R., Loers, G., Münzenberg, M., Blick, R. H.
Advanced Biosystems, 2019, DOI: 10.1002/adbi.201800329

Low-loss fiber-to-chip couplers with ultrawide optical bandwidth
Gehring, H., Blaicher, M., Hartmann, W., Varytis, P., Busch, K., Wegener, M., Pernice, W. H. P.
APL Photonics 4, 2019, DOI: 10.1063/1.5064401

UV-Triggered Polydopamine Secondary Modification: Fast Deposition and Removal of Metal Nanoparticles
Zeng, Y., Du, X., Hou, W., Liu, X., Zhu, C., Gao, B., Sun, L., Li, Q., Liao, J., Levkin, P. A., Gu, Z.
Adv. Funct. Mater. 2019, DOI: 10.1002/adfm.201901875

Design and experimental investigation of nano-structured optical polarizing elements based on two-photon photopolymerization
Guo, J., Sun, T., He, C., Xia, J., Cao, M., Wang, C.
Proceedings Vol. 11170, 14th National Conference on Laser Technology and Optoelectronics (LTO 2019), DOI: 10.1117/12.2532701

3D-Printed Surfaces Inspired by Bi-Gaussian Stratified Plateaus
Hu, S., Cao, X., Reddyhoff, T., Puhan, D., Huang, W., Shi, X., Peng, Z., Dini, D.
ACS Appl. Mater. Interfaces, DOI: 10.1021/acsami.9b04020

Two-photon polymerized poly(caprolactone) retinal cell delivery scaffolds and their systemic and retinal biocompatibiliy
Thompson, J. R., Worthington, K. S., Green, B. J., Mullin, N. K., Jiao, C., Kaalberg, E. E., Wiley, L. A., Han, I. C., Russell, S. R., Sohn, E. H., Guymon, C. A., Mullins, R. F., Stone, E. M., Tucker, B. A.
Acta Biomaterialia, 2019, DOI: 10.1016/j.actbio.2019.04.057

PhaseCam3D - Learning Phase Masks for Passive Single View Depth Estimation
Wu, Y., Boominathan, V., Chen, H., Sankaranarayanan, A., Veeraraghavan, A.
IEEE Intl. Conf. Computational Photography (ICCP), 2019

Producing OAM Information Carriers using Microstructured Sprial Phase Plates
Stegenburgs, E., Bertoncini, A., Trichili, A., Alias, M. S., Ng, T. K., Alouini, M.-S., Liberale, C., Ooi, B. S.
Conference on Lasers and Electro-Optics, 2019, DOI: 10.1364/CLEO_AT.2019.JTh2A.51

Development of Direct-Laser-Printable Light-Powered Nanocomposites
Chen, L., Dong, Y., Tang, C.-Y., Zhong, L., Law, W.-C., Tsui, G. C. P., Yang, Y., Xie, X.
ACS Appl. Mater. Interfaces, 2019, DOI: 10.1021/acsami.9b05871

MOFBOTS: Metal-Organic-Framework-Based Biomedical Microrobots
Wang, X., Chen, X.-Z., Alcantara, C. C. J., Sevim, S., Hoop, M., Terzopoulou, A., de Marco, C., Hu, C., de Mello, A. J., Falcaro, P., Furukawa, S., Nelson, B. J., Puigmarti-Luis, J., Pané, S.
Adv. Mater. 2019, DOI: 10.1002/adma.201901592

Automatic Microwaveguide Coupling Based on Hybrid Position and Light Intensity Feedback
Wang, P., Li, D., Shen, S., Shen, Y.
IEEE/ASME Transactions on Mechatronics, 2019, DOI: 10.1109/TMECH.2019.2908824

Micro-cone textures for improved light in-coupling and retroreflection-inspired light trapping at the front surface of solar modules
Dottermusch, S., Schmager, R., Klampaftis, E., Paetel, S., Kiowski, O., Ding, K., Richards, B. S., Paetzold, U. W.
Prog Photovolt Res Appl. 2019, 2019, DOI: 10.1002/pip.3133

Precise Assembly and Joining of Silver Nanowires in Three Dimensions for Highly Conductive Composite Structures
Liu, Y., Xiong, W., Li, D., Lu, Y., Huang, X., Liu, H., Fan, L., Jiang, L., Silvain, J.-F., Lu, Y.
International Journal of Extreme Manufacturing, 2019, DOI: 10.1088/2631-7990/ab17f7

Thermocapillary micromanipulation: force characterization and Cheerios interaction
Terrazas, R., De Maeijer, A., Bolopion, A., Gauthier, M., Kinnaert, M., Lambert, P.
Journal of Micro-Bio Robotics, 2019, DOI: 10.1007/s12213-019-00117-z

2D lens array for multi-contrast X-ray imaging
Mikhaylov, A. A., Reich, S., Plech, A., Zakharova, M., Vlnieska, V., Kunka, D.
Proc. SPIE 11032, EUV and X-ray Optics: Synergy between Laboratory and Space VI, 2019, DOI: 10.1117/12.2520687

Synthetic and living micropropellers for convection-enhanced nanoparticle transport
Schuerle, S., Soleimany, A. P., Yeh, T., Anand, G. M., Häberli, M., Fleming, H. E., Mirkhani, N., Qiu, F., Hauert, S., Wang, X., Nelson, B. J., Bhatia, S. N.
Science Advances, 2019, Vol. 5, no. 4, DOI: 10.1126/sciadv.aav4803

Custom-made optical scatterers produced by 3D direct laser writing
Glöckler, F., Müller, D., Erb, F., Gottschalk, K.-E., Kienle, A.
Optical Materials Express, Vol. 9, Issue 5, 2019, DOI: 10.1364/OME.9.002327

Off-Axis Holography with Uniform Illumination via 3D Printed Diffractive Optical Elements
Wang, H., Liu, Y., Ruan, Q., Liu, H., Ng, R. J. H., Tan, Y. S., Wang, H., Li, Y., Qiu, C.-W., Yang, J. K. W.
Adv. Optical Mater., 2019, DOI: 10.1002/adom.201900068

Design and fabrication of tubular micro/nanomotors via 3D laser lithography
Chen, Y., Xu, B., Mei, Y.
Chem. Asian J., 2019, DOI: 10.1002/asia.201900300

Observation of complete photonic bandgap in low refractive index contrast inverse rod-connected diamond strucutred chalcogenides
Chen, L., Morgan, K. A., Alzaidy, G. A., Huang, C.-C., Ho, Y.-L. D., Taverne, M., Zheng, X., Ren, Z., Feng, Z., Zeimpekis, I., Hewak, D. W., Rarity, J. G.
ACS Photonics, 2019, DOI:

Novel liquid crystal photonic devices enabled by two-photon polymerization
He, Z., Tan, G., Chanda, D., Wu, S.-T.
Optics Express, Vol. 27, 29, DOI: 10.1364/OE.27.011472

Ultrahigh light extraction efficiency light emitting diodes by harnessing asymmetric obtuse angle microstructured surfaces
Chen, C.-J., Yao, J., Zhu, W., Chao, J.-H., Shang, A., Lee, Y.-G., Yin, S.
Optik, Vol. 182, 2019, DOI:

Constructing multifunctional wave plates with stereo-metastructure arrays
Sun, S., Gao, Y., Xiong, X., Peng, R., Wang, M.
Optics Letters, Vol. 44, No. 7, 2019, DOI: 10.1364/OL.44.001758

3D Scaffolds to Study Basic Cell Biology
Hippler, M., Lemma, E. D., Bertels, S., Blasco, E., Barner-Kowollik, C., Wegener, M., Bastmeyer, M.
Adv. Mater. 2019, DOI: 10.1002/adma.201808110

3-D printed photoreceptor phantoms for evaluating lateral resolution of adaptive optics imaging systems
Kedia, N., Liu, Z., Sochol, R. D., Tam, J., Hammer, D. X., Agrawal, A.
Optics Letters, Vol. 44, Issue 7, 2019, DOI: 10.1364/OL.44.001825

Hybrid Two-Scale Fabrication of Sub-Millimetric Capillary Grippers
Dehaeck, S., Cavaiani, M., Chafai, A., Tourtit, Y., Vitry, Y., Lambert, P.
Micromachines 2019, 10(4), DOI:

Fabrication of arbitrary three-dimensional suspended hollow microstructures in transparent fused silica glass
Kotz, F., Risch, P., Arnold, K., Sevim, S., Puigmartí-Luis, J., Quick, A., Thiel, M., Hrynevich, A., Dalton, P. D., Helmer, D., Rapp, B. E.
Nature Communications 10, 2019, DOI: 10.1038/s41467-019-09497-z

Lightweight, flaw-intolerant, and ultrastrong nanoarchitected carbon
Zhang, X., Vyatskikh, A., Gao, H., Greer, J. R., Li, X.
Proceedings of the National Academy of Sciences of the United States of America, 2019, DOI: 10.1073/pnas.1817309116

3D printing of micro-optic spiral phase plates for the generation of optical vortex beams
Wei, H., Amrihanath, A. K., Krishnaswamy, S.
IEEE Photonics Technology Letters, 2019, DOI: 10.1109/LPT.2019.2903151

3D printed nozzles on a silicon fluidic chip
Bohne, S., Heymann, M., Chapman, H. N., Trieu, H. K., Bajt, S.
Rev. Sci. Instrum. 90, 2019
, DOI:10.1063/1.5080428

Characterization and simulation of bi-Gaussian surfaces induced by material transfer and additive processes
Hu, S., Reddyhoff, T., Wen, J., Huang, W., Shi, X., Dini, D., Peng, Z.
Tribology International, 2019, DOI: 10.1016/j.triboint.2019.03.032

Hollow waveguide array with subwavelength dimensions as a space-variant polarization converter
Belle, S., Helfert, S. F., Hellmann, R., Jahns, J.
J. Opt. Soc. Am. B 36, (2019), DOI:

Synthesis and properties of four new two-photon polymerization initiators with expanded conjugated structures
Zhang, S., Wan, X. Y., Peng, Y. H., Yin, Q.
IOP Conf. Ser.: Mater. Sci. Eng. 479, 2019, DOI: 10.1088/1757-899X/479/1/012109

Indirect optical trapping using light driven micro-rotors for reconfigurable hydrodynamic manipulation
Būtaitė, U. G., Gibson, G. M., Ho, Y.-L. D., Taverne, M., Taylor, J. M., Phillips, D. B.
Nature Communications 10, 2019, DOI: 10.1038/s41467-019-08968-7

3D Fabrication of Fully Iron Magnetic Microrobots
Alcântara, C. C. J., Kim, S., Lee, S., Jang, B., Thakolkaran, P., Kim, J.-Y., Choi, H., Nelson, B. J., Pané, S.
Small, 2019, DOI: 10.1002/smll.201805006

3D-Printed Microrobotic Transporters with Recapitulated Stem Cell Niche for Programmable and Active Cell Delivery
Yasa, I. C., Tabak, A. F., Yasa, O., Ceylan, H., Sitti, M.
Adv. Funct. Mater. 2019, DOI: 10.1002/adfm.201808992

Towards inverse design of biomimetic nanostructures exhibiting composite structural coloration
Datta, B. C., Jolly, S. K., Bove, V. M. Jr.
Proc. SPIE 10930, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XII, 1093012, 2019, DOI: 10.1117/12.2510027

Three-dimensional organic microlasers
Guidry, M. A., Song, Y., Lafargue, C., Dietz, B., Decanini, D., Grigis, A., Lebental, M.
Proc. SPIE 10904, Laser Resonators, Microresonators, and Beam Control XXI, 109040Z, 2019, DOI: 10.1117/12.2506621

Super-fine inkjet process for alignment-free integration of non-transparent structures into 3D-printed micro-optics
Toulouse, A., Thiele, S., Giessen, H., Herkommer, A. M.
Proc. SPIE 10930, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XII, 109300W, 2019, DOI: 10.1117/12.2513520

Large scale three-dimensional inverse design of discrete scatterer optics
Zhan, A., Gibson, R., Whitehead, J., Smith, E., Hendrickson, J., Majumdar, A.
Proc. SPIE 10928, High Contrast Metastructures VIII, 109281O, 2019, DOI
: 10.1117/12.2511323

Direct laser writing of smart polymer photonic devices for ultrasound detection
Wei, H., Amrithanath, A. K., Krishnaswamy, S.
Proc. SPIE 10922, Smart Photonic and Optoelectronic Integrated Circuits XXI,
109220F, 2019, DOI: 10.1117/12.2511226

Design and fabrication of nano-tapered whispering gallery spiral waveguide for gold nanoparticle detection
Kamal, Sinha, R., Bag, S., Wan, M., Varshney, S. K.
Proc. SPIE 10921, Integrated Optics: Devices, Materials, and Technologies XXIII, 109211Q, 2019, DOI: 10.1117/12.2507541

Compact OCT probe for flexible endoscopy enabled by piezoelectric scanning of a fiber/lens assembly
Shah, R. N., Kretschmer, S., Nehlich, J., Ataman, Ç., Zappe, H.
Proc. SPIE 10931, MOEMS and Miniaturized Systems XVIII, 109310A, 2019, DOI: 10.1117/12.2508481

Additive manufacturing of titanium dioxide for dielectric photonic crystals
Vyatskikh, A., Ng, R. C., Edwards, B., Greer, J. R.
Proc. SPIE 10930, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XII, 109300H, 2019, DOI: 10.1117/12.2507076

3D printed micro-electro-fluidic probe (MeFP) for single cell electroporation
Brimmo, A., Menachery, A., Qasaimeh, M. A.
Proc. SPIE 10875, Microfluidics, BioMEMS, and Medical Microsystems XVII, 108751G ,
2019, DOI: 10.1117/12.2516043

Direct laser writing of optical biosensor based on photonic floquet topological insulator for protein-detection
Amrithanath, A. K., Wei, H., Krishnaswamy, S.
Proc. SPIE 10895, Frontiers in Biological Detection: From Nanosensors to Systems XI, 108950Y, 2019, DOI: 10.1117/12.2511158

Towards development of fibre-optic surface enhanced Raman spectroscopy probes using 2-photon polymerisation for rapid detection of bacteria
Kim, J. A., Wales, D. J., Thompson, A. J., Yang, G.-Z.
Proc. SPIE 10894, Plasmonics in Biology and Medicine XVI, 108940F, 2019, DOI: 10.1117/12.2507961

Photonic-chip-on-tip: compound photonic devices fabricated on optical fibers
Markiewicz, K., Wasylczyk, P.
Optics Express, 27, 2019, DOI:

Fabrication of functional nanophotonic devices by multiphoton lithography
Kuebler, S. M., Xia, C., Sharma, R., Digaum, J. L., Martinez, N. P., Valle, C. L., Rumpf, R. C.
SPIE OPTO Proceedings Volume 10915, Organic Photonic Materials and Devices XXI, 2019, DOI: 10.1117/12.2508675

Colouration by total internal reflection and interference at microscale concave interfaces
Goodling, A. E., Nagelberg, S., Kaehr, B., Meredith, C. H., Cheon, S. I., Saunders, A. P., Kolle, M., Zarzar L. D.
Nature, 566 (2019), DOI: 10.1038/s41586-019-0946-4

Electron Microscopy for 3D Scaffolds-Cell Biointerface Characterization
Iandolo, D., Pennacchio, F. A., Mollo, V., Rossi, D., Dannhauser, D., Cui, B., Owens, R. M., Santoro, F.
Adv. Biosys. 2019, DOI: 10.1002/adbi.201800103

3D-printed infrared metamaterials
Sharac, N., Iyer, G. R. S., Tischler, J. G.
SPIE OPTO Proceedings Volume 10926, Quantum Sensing and Nano Electronics and Photonics XVI, 2019, DOI: 10.1117/12.2510994

Automatic 3D Reconstruction of SEM images based on Nano-robotic Manipulation and Epipolar Plane Images
Ding, W., Zhang, Y., Lu, H., Wan, W., Shen, Y.
Ultramicroscopy, 2019,  DOI: 10.1016/j.ultramic.2019.02.014

Micron resolution, high-fidelity three-dimensional vascular optical imaging phantoms
Little, C. D., Poduval, R. K., Caulfield, R., Noimark, S., Colchester, R. J., Loder, C. D., Tiwari, M. K., Rakhit, R. D., Papakonstantinou, I., Desjardins, A. E.
J. of Biomedical Optics, 24(2), 2019, DOI: 10.1117/1.JBO.24.2.020502

Polymer-based holograms with individually ajustable structure angle
Klein, T., Thiemicke, F., Falldorf, C., Bergmann, R. B.
Opt. Eng. 58 (29), 2019, DOI: 10.1117/1.OE.58.2.025105

Acoustofluidic micromixer on lab-on-a-foil devices
Lin, Y., Gao, C., Gao, Y., Wu, M., Yazdi, A. A., Xu, J.
Sensors and Actuators: B. Chemical, 2019, DOI: 10.1016/j.snb.2019.02.050

Locally addressable material properties in 3D micro-architectures
Rys, J., Steenhusen, S., Schumacher, C., Cronauer, C., Daraio, C.
Extreme Mechanics Letters, 2019, DOI: 10.1016/j.eml2019.02.001

3D-microfabrication by two-photon polymerization of an integrated sacrificial stencil mask
Puce, S., Sciurti, E., Rizzi, F., Spagnolo, B., Qualtieri, A., De Vittorio, M., Staufer, U.
Micro and Nano Engineering, Volume 2, 2019, DOI: 10.1016/j.mne.2019.01.004

3D-Printed Biodegradable Microswimmer for Theranostic Cargo Delivery and Release
Ceylan, H., Yasa, I. C., Yasa, O., Tabak, A. F., Giltinan, J., Sitti, M.
ACS Nano, 2019, DOI: 10.1021/acsnano.8b09233

Multimaterial 3D laser microprinting using an integrated microfluidic system
Mayer, F., Richter, S., Westhauser, J., Blasco, E., Barner-Kowollik, C., Wegener, M.
Science Advances 2019, DOI: 10.1126/sciadv.aau9160

Programmable Collective Behavior in Dynamically Self-Assembled Mobile Microrobotic Swarms
Yigit, B., Alapan, Y., Sitti, M.
Adv. Sci. 2019, DOI:

Three-dimensional metamaterial Hall-bar devices
Kern, C., Wegener, M.
Phys. Rev. Materials 3, 2019, DOI: 10.1103/PhysRevMaterials.3.015204

3D arrays of microcages by two-photon lithography for spatial organization of living cells
Larramendy, F., Yoshida, S., Maier, D., Fekete, Z., Takeuchi, S., Paul, O.
Lab on a Chip, 2019, DOI: 10.1039/c8lc01240g

Fabrication of multi-materials 3D structures by the integration of direct laser writing and MEMS stencil patterning
Reeves, J. B., Jayne, R. K., Barrett, L., White, A. E., Bishop, D. J.
Nanoscale, 2019, DOI: 10.1039/c8nr09174a

Near-infrared transmittance enhancement using fully conformal antireflective structured surfaces on microlense fabricated by direct laser writing
Li, Y., Park, S., Fullager, D. B., Childers, D., Poutous, M. K., Aggarwal, I. D., Boreman, G., Hofmann, T.
Optical Engineering, 58
, 2019, DOI: 10.1117/1.OE.58.1.010501

Endoscopic optical coherence tomography angiography using a forward imaging piezo scanner
Wurster, L. M., Shah, R. N., Placzek, F., Kretschmer, S., Niederleithner, M., Ginner, L., Ensher, J., Minnemann, M. P., Hoover, E. E., Zappe, H., Drexler, W., Leitgeb, R. A., Ataman, C.
J Biophotonics, 2019, DOI: 10.1002/jbio.201800382

Computationally efficient design of directionally compliant metamaterials
Shaw, L. A., Sun, F., Portela, C. M., Barranco, R. I., Greer, J. R., Hopkins, J. B.
Nature Comminucations
10, 2019, DOI: 10.1038/s41467-018-08049-1

Two-Photon Nanolithography of Tailored Hollow three-dimensional Microdevices for Biosystems
Liao, C., Anderson, W., Antaw, F., Trau, M.
ACS Omega, 2019, DOI: 10.1021/acsomega.8b03164

Geometric Determinants of In-Situ Direct Laser Writing
Lamont, A. C., Alsharhan, A. T., Sochol, R. D.
Scientific Reports, 2019, DOI: 10.1038/s41598-018-36727-z

High-bandwidth 3D Multi-Trap Actuation Technique for 6-DoF Real-Time Control of Optical Robots
Gerena, E., Regnier, S., Haliyo, S.
IEEE Robotics and Automation Letters, 2019, DOI
: 10.1109/LRA.2019.2892393

Simultaneous Six-Degree-of-Freedom Control of a Single-Body Magnetic Microrobot
Giltinan, J., Sitti, M.
IEEE Robotics and Automation Letters, Vol. 4, No. 2, 2019, DOI: 10.1109/LRA.2019.2891080

Controlling the shape of 3D microstructures by temperature and light
Hippler, M., Blasco, E., Qu, J., Tanaka, M., Barner-Kowollik, C., Wegener, M., Bastmeyer, M.
Nature Communications 10, 2019, DOI: 10.1038/s41467-018-08175-w

Contact line stick-slip motion and meniscus evolution on micrometer-size wavy fibres
Fuentes, C. A., Hatipogullari, M., Van Hoof, S., Vitry, Y., Dehaeck, S., Du Bois, V., Lambert, P., Colinet, P., Seveno, D., Van Vuure, A. W.
Journal of Colloid and Interface Science, Volume 540, 2019, DOI: 10.1016/j.jcis.2019.01.045

Reversible Laser Threshold Modulation in Dithienylethene Conjugated Polymer Blends - A Concept for q-switching in Organic DFB Lasers
Steppert, A.-K., Mikosch, A., Haraszti, T., Göstl, R., Kuehne, A. J. C.
ACS Photonics, 2019, DOI: 10.1021/acsphotonics.8b01641

Polysaccharide hydrogels for multiscale 3D printing of pullulan scaffolds
Della Giustina, G., Gandin, A., Brigo, L., Panciera, T., Giulitti, S., Sgarbossa, P., D'Alessandro, D., Trombi, L., Danti, S., Brusatin, G.
Materials & Design, 2019, DOI:

The mechanical response of cellular materials with spinodal topologies
Hsieh, M.-T., Endo, B., Zhang, Y., Bauer, J., Valdevit, L.
Journal of the Mechanics and Physics of Solids, 2019, DOI: 10.1016/j.jmps.2019.01.002

Size Effect on the Strength and Deformation Behavior of Glassy Carbon Nanopillars
Albiez, A., Schwaiger, R.
MRS Advances, 2019, DOI: 10.1557/adv.2018.648


A 3D-Printed 1 MG Legged Microrobot Running at 15 Body Lengths per Second
St. Pierre, R., Gosrich, W., Bergbreiter, S.
Solid-State Sensors, Actuators and Microsystems Workshop, 2018, DOI: 10.31438/trf.hh2018.16

The Hollow Core Light cage: Trapping Light Behind Bars
Jain, C., Braun, A., Gargiulo, J., Jang, B., Li, G., Lehmann, H., Maier, S. A., Schmidt, M. A.
ACS Photonics, DOI: 10.1021/acsphotonics.8b01428

Optimization of 3D-printed microstructures for investigating the properties of the mucus biobarrier
Bunea, A.-I., Jakobsen, M. H., Engay, E., Banas, A. R., Glückstad, J.
Micro and Nano Engineering, 2018, DOI: 10.1016/j.mne.2018.12.004

Temperature calculation in metal substrates during two-photon polymerization
Harnisch, E. M., Venek, T., Nohr, S., König, N., Schmitt, R.
Opt. Mater. Express 9, 2018, DOI:

Woodpile structure: effective diffractive photonic element
Urbancová, P., Goraus, M., Pudiš, D.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, DOI: 10.1117/12.2517749

Polymer-based Mach-Zehnder interferometer for on-chip applications
Ďurišová, J., Gašo, P., Pudiš, D., Figurová, M., Kuzma, A.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, DOI: 10.1117/12.2518398

Polymer-based 3D microcones for application in SERS
Lettrichova, I., Pudis, D., Gaso, P., Jandura, D., Kovac, J. Jr., Laurencikova, A., Novak, J., Goraus, M.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, DOI: 10.1117/12.2518517

Polymer photonic structures for lab-on-a-fiber applications
Martincek, I., Goraus, M., Kacik, D.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, DOI: 10.1117/12.2518198

Optical microring structure applied at the end of the optical fiber
Gaso, P., Jandura, D., Pudis, D.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, DOI: 10.1117/12.2518361

Modification of angular photoresponse of InGaAsN-based photodiode with 3D woodpile structures
Suslik, L., Goraus, M., Urbancova, P., Sciána, B., Dawidowski, W., Tłaczała, M.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, DOI: 10.1117/12.2518357

Double wavelength multifunctional optical tweezers
Drobczynski, S., Korzeniewska, A., Lamperska, W., Wasylczyk,, P., Drabik, D., Dus-Szachniewicz, K.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, DOI: 10.1117/12.2518363

Design and preparation of polymer-based microspectrometer using laser lithography
Jandura, D., Markotan, M., Pudiš, D.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, DOI: 10.1117/12.2518354

3D polymer-based woodpile structure for application in photonics
Pudiš, D., Urbancová, P., Goraus, M.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, DOI: 10.1117/12.2518339

3D polymer-based air-bridge waveguides for on chip applications
Goraus, M., Pudiš, D., Martincek, I., Urbancová, P.
Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, DOI: 10.1117/12.2518200

Polarizing beam splitter integrated onto an optical fiber facet
Hahn, V., Kalt, S., Sridharan, G. M., Wegener, M., Bhattacharya, S.
Optics Express, Vo. 26, 2018, DOI:

Tunable metallic nanostructures using 3D printed nanosphere templates
Jose, B., Vijayaraghavan, R. K., Kent, L., O'Toole, S., O'Leary, J., Forster, R. J.
Electrochemistry Communications, Vol. 98, 2018, DOI: 10.1016/j.elecom.2018.12.002

Fabrication of hybrid Fabry-Pérot microcavity using two-photon lithograpghy for single-photon sources
Ortiz-Huerta, F., Chen, L., Taverne, M., Hadden, J.P., Johnson, M., Ho, Y. L. D., Rarity, J. G.
Optics Express, Vol. 26, 2018, 10.1364/OE.26.033245

Light collection from a low-temperature scanning tunneling microscope using integrated mirror tips fabricated by direct laser writing
Edelmann, K., Gerhard, L., Winkler, M., Wilmes, L., Rai, V., Schumann, M., Kern, C., Meyer, M., Wegener, M., Wulfhekel, W.
Review of Scientific Instruments 90, 2018, DOI: 10.1063/1.5053882

Exposure-dependent refractive index of Nanoscribe IP-Dip photoresist layers
Dottermusch, S., Busko, D., Langenhorst, M., Paetzold, U. W., Richards, B. S.
Optics Letters, 2018, DOI: 10.1364/OL.44.000029

Discrete-Continuum Duality of Architected Materials: Failure, Flaws, and Fracture
Mateos, A. J., Huang, W., Zhang, Y.-W., Greer, J. R.
Advanced Functional Materials, 2018, DOI: 10.1002/adfm.201806772

Fabrication and tribological characterization of deformation-resistant nano-textured surfaces produced by two-photon lithography and atomic layer deposition
Steck, J. G., Afshar-Mohajer, M., Sun, Q., Meng, X., Zou, M.
Tribology International, 2018, DOI: 10.1016/

Geometric stabilisation of topological defects on micro-helices and grooved rods in nematic liquid crystals
Nikkhou, M., Musevic, I.
Soft Matter, 2018, 14 ,
DOI: 10.1039/c8sm01583j

3D Polymer Based Fabry-Pérot Interferometer for Lab-on-Fiber Applications
Goraus, M., Martincek, I., Pudis, D.
2018 12th International Conference on Advanced Semiconductor Devices and Microsystems (ASDAM), DOI
: 10.1109/ASDAM.2018.8544506

3D Waveguide Device with Fabry-Perot Resonator for Sensing Applications
Jandura, D., Schaaf, P., Pudis, D., Gaso, P., Bonko, A.
2018 12th International Conference on Advanced Semiconductor Devices and Microsystems (ASDAM), DOI: 10.1109/ASDAM.2018.8544628

3D Photonic Technologies for Applications on a Chip and Optical Fiber
Pudiš, D., Goraus, M., Urbancová, P., Jandura, D., Gašo, P., Lettrichová, I., Martinček, I., Ďurišova, J., Šušlik, L., Tlaczala, M., Novák, J., Kováč J., Ściana, B., Škriniarová, J., Kováč J. Jr.
2018 12th International Conference on Advanced Semiconductor Devices and Microsystems (ASDAM), DOI: 10.1109/ASDAM.2018.8544529

3D-Printed Surface Architecture Enhancing Superhydrophobicity and Viscous Droplet Repellency
Graeber, G., Kieliger O. B. M., Schutzius, T. M., Poulikakos, D.
ACS Appl. Mater. Interfaces 2018, DOI: 10.1021/acsami.8b16893

Three-dimensional direct laser written achromatic axicons and multi-component microlenses
Schmid, M., Thiele, S., Herkommer, A., Giessen, H.
Optics Letters, Vol. 43, Issue 23, 2018, DOI:

Femtosecond direct laser induced assembly of monolayer of Gold Nanostructures with tunable surface plasmon resonance and high performance LSPR and SERS Sensingacs
Jradi, S., Zaarour, L., Chehadi, Z., Akil, S., Plain, J.
Langmuir, 2018, DOI: 10.1021/acs.langmuir.8b00413

Two-photon direct laser writing of beam expansion tapers on single-mode optical fibers
Vanmol, K., Tuccio, S., Panapakkam, V., Thienpont, H., Watté, J., Van Erps, J.
Optics & Laser Technology, 2018, DOI: 10.1016/j.optlastec.2018.11.028

Correlation between topology and elastic properties of imperfect truss-lattice materials
Gross, A., Pantidis, P., Bertoldi, K., Gerasimidis, S.
Journal of the Mechanics and Physics of Solids, 2018, DOI:

Covert infrared image encoding through imprinted plasmonic cavities
Franklin, D., Modak, S., Vázquez-Guardado, Safaei, A., Chanda, D.
Light: Science & Applications 2018, DOI: 10.1038/s41377-018-0095-9

Microstructure-Stabilized Blue Phase Liquid Crystals
Lin, J.-D., Ho, Y.-L. D., Chen, L., Lopez-Garcia, M., Jiang, S.-A., Taverne, M. P. C., Lee, C.-R., Rarity, J. G.
ACS Omega, 2018, DOI: 10.1021/acsomega.8b01749

Hardwired Configurable Photonic Integrated Circuits Enabled by 3D Nanoprinting
Hoose, T., Blaicher, M., Kemal, J. N., Zwickel, H., Billah, M. R., Dietrich, P.-I., Hofmann, A., Freude, W., Randel, S., Koos, C.
2018 European Conference on Optical Communication (ECOC), DOI: 10.1109/ECOC.2018.8535258

Feasibility Analysis of Nanostructured Planar Focusing Collectors for Concentrating Solar Power Applications
Ding, Q., Barna, S. F., Jacobs, K., Choubal, A., Mensing, G. A., Zhang, Z., Yamada, K., Kincaid, N., Zhu, G., Tirawat, R., Wendelin, T., Guo, L. J., Ferreira, P. M., Toussaint, K. C.
ACS Appl. Energy Mater., 2018,  DOI: 10.1021/acsaem.8b01328

Two-Photon Polymerization as a Tool for Studying 3D Printed Topography-Induced Stem Cell Fate
Worthington, K. S., Do, A.-V., Smith, R., Tucker, B. A., Salem, A. K.
Macromol. Biosci. 2018, DOI: 10.1002/mabi.201800370

3D Photoluminescent Nanostructures Containing Quantum Dots Fabricated by Two-Photon Polymerization: Influence of Quantum Dots on the Spatial Resolution of Laser Writing
Peng, Y., Jradi, S., Yang, X., Dupont, M., Hamie, F., Dinh, X. Q., Sun, X. W., Xu, T., Bachelot, R.
Adv. Mater. Technol., 2018, DOI: 10.1002/admt.201800522

Superoleophobic Slippery Lubricant-Infused Surfaces: Combining Two Extremes in the Same Surface
Dong, Z., Schumann, M. F., Hokkanen, M. J., Chang, B., Welle, A., Zhou, Q., Ras, R. H A., Xu, Z., Wegener, M., Levkin, P. A.
Adv. Mater. 2018, 30, DOI: 10.1002/adma.201803890

Broadband highly directive 3D nanophotonic lenses
Johlin, E., Mann, S. A., Kasture, S., Koenderink, A. F., Garnett, E. C.
Nature Communications 9, 2018, DOI: 10.1038/s41467-018-07104-1

Engineering bacterial vortex lattice via direct laser lithography
Nishiguchi, D., Aranson, I. S., Snezhko, A., Sokolov, A.
Nature Communications 9, 2018, DOI:

3D Nanofabrication of SiOC Ceramic Structures
Brigo, L., Schmidt, J. E. M., Gandin, A., Michieli, N., Colombo, P., Brusatin, G.
Advanced Science, 2018, DOI:

Polarization Conversion Effect in Biological and Synthetic Photonic Diamond Structures
Wu, X., Rodríguez-Gallegos, F. L., Heep, M.-C., Schwind, B., Li, G., Fabritius, H.-O., von Freymann, G., Förstner, J.
Advanced Optical Materials, 2018, DOI: 10.1002/adom.201800635

Alignment-free integration of apertures and nontransparent hulls into 3D-printed micro-optics
Toulouse, A., Thiele, S., Giessen, H., Herkommer, A. M.
Optics Letters, Vol. 43, Issue 21, 2018, DOI:

High-contrast infrared polymer photonic crystals fabricated by direct laser writing
Li, Y., Fullager, D. B., Park, S., Childers, D., Fesperman, R., Boreman, G., Hofmann, T.
Optics Letters, Vol. 43, Issue 19, 2018, DOI: 10.1364/OL.43.004711

Conjugated Carbazole-Based Schiff Bases as Photoinitiators: From Facile Synthesis to Efficient Two-Photon Polymerization
Li, Z., Hu, P., Zhu, J., Gao, Y., Xiong, X., Liu, R.
Journal of Polymer Science, 2018, DOI: 10.1002/pola.29254

Two-photon polymerisation 3D printed freeform micro-optics for optical coherence tomography fibre probes
Li, J., Fejes, P., Lorenser, D., Quirk, B. C., Noble, P. B., Kirk, R. W., Orth, A., Wood, F. M., Gibson, B. C., Sampson, D. D., McLaughlin, R. A.
Scientific Reports 8, 2018, DOI: 10.1038/s41598-018-32407-0

Integrated light-sheet illumination using metallic slit microlenses
Ye, F., Avants, B. W., Veeraraghavan, A., Robinson, J. T.
Opt. Express 26, 2018, DOI: 10.1364/OE.26.027326

Optically fabricated and controlled microtool as a mobile heat source in microfluidics
Engay, E., Bunea, A.-I., Banas, A. R., Chouliara, M., Glückstad, J.
Proc. SPIE 10804, Advanced Manufacturing Technologies for Micro- and Nanosystems in Security and Defence, 2018, DOI: 10.1117/12.2325359

Rational design of light-controlled microrobots
Bunea, A.-I., Engay, E., Chouliara, M., Banas, A. R., Glückstad, J.
Proc. SPIE 10804, Advanced Manufacturing Technologies for Micro- and Nanosystems in Security and Defence, 2018, DOI:

Crystallinity and morphology of barium titanate filled poly(vinylideneuoride) nanocomposites
Gong, X., Chen, Y., Tang, C.-Y., Law, W.-C., Chen, L., Wu, C., Hu, T., Tsui, G. C. P.
J. Appl. Polym. Sci., 2018, DOI:

Photo-responsive suspended micro-membranes
Descrovi, E., Pirani, F., Rajamanickam, V. P., Licheri, S., Liberale, C.
J. Mater. Chem. C, 6, 2018, DOI: 10.1039/C8TC03877E

Microfabrication of pH-responsive 3D hydrogel structures via two-photon polymerization of high-molecular-weight poly(ethylene glycol) diacrylates
Scarpa, E., Lemma, E. D., Fiammengo, R., Cipolla, M. P., Pisanello, F., Rizzi, F., De Vittorio, M.
Sensors and Actuators: B. Chemical, 2018, DOI: 10.1016/j.snb.2018.09.079

Controlled Drug Delivery from 3D Printed Two-Photon Polymerized Poly(Ethylene Glycol) Dimethacrylate Devices
Do, A.-V., Worthington, K., Tucker, B., Salem, A. K.
International Journal of Pharmaceutics, 2018, DOI: 10.1016/j.ijpharm.2018.09.065

A Bio-inspired 3D Micro-structure for Graphene-based Bacteria Sensing
Li, B., Tan, H., Anastasova, S., Power, M., Seichepine, F., Yang, G.-Z.
Biosensors and Bioelectronic, 2018, DOI: 10.1016/j.bios.2018.09.087

A 300 THz tabletop radar range system with sub-micron distrance accuracy
Blanche, P.-A., Neifeld, M., Tuo, M., Xin, H., Peyghambarian, N.
Scientific Reports 8, 2018, DOI: 10.1038/s41598-018-32846-9

A Hierarchical Programmable Mechanical Metamaterial Unit Cell Showing Metastable Shape Memory
Berwind, M. F., Kamas, A., Eberl, C.
Adv. Eng. Mater., 2018, DOI: 10.1002/adem.201800771

Superhydrophobic Surfaces Based on Fractal and Hierarchical Microstructures Using Two-Photon Polymerization: Toward Flexible Superhydrophobic Films
Lin, Y., Zhou, R., Xu, J.
Adv. Mater. Interfaces, 2018, DOI: 10.1002/admi.201801126

3D Plate-Lattices: An Emerging Class of Low-Density Metamaterial Exhibiting Optimal Isotropic Stiffness
Tancogne-Dejean, T., Diamantopoulou, M., Gorji, M. B., Bonatti, C., Mohr, D.
Adv. Mater. 2018, DOI:

3D Printed Enzymatically Biodegradable Soft Helical Microswimmers
Wang, X., Qin, X.-H., Hu, C., Terzopoulou, A., Chen, X.-Z., Huang, T.-Y., Maniura-Weber, K., Pané, S., Nelson, B. J.
Adv. Funct. Mater., 2018, DOI: 10.1002/adfm.201804107

2.5-dimensional polymer-based holograms with individually adjustable structure angle
Klein, T., Tiemicke, F., Falldorf, C., Bergmann, R. B.
Proc. SPIE 10744, Laser Beam Shaping XVIII, 107440A, 2018, DOI: 10.1117/12.2320991

Characterization of 3D phantom for holographic tomography produced by two-photon polymerization
Ziemczonok, M., Kuś, A., Nawrot, M., Kujawińska, M.
Proc. SPIE 10834, Speckle 2018: VII International Conference on Speckle Metrology, 2018, DOI: 10.1117/12.2319581

Relaxing alignment tolerance in single-mode fiber connections using 3D nanoprinted beam expanders
Vanmol, K., Tuccio, S., Panapakkam, V., Thienpont, H., Watté, J., Van Erps, J.
Proc. SPIE 10746, Novel Optical Systems Design and Optimization XXI, 2018, DOI: 10.1117/12.2320983

3D-printed carbon electrodes for neurotransmitter detection
Venton, B. J., Yang, C., Cao, Q., Puthongkham, P., Lee, S. T., Ganesana, M., Lavrik, N. V.
Angew. Chem. Int. Ed., 2018, DOI:

Design and Fabrication of Embedded Nanofences in Racetrack Microring Resonator for Single Gold Nanoparticle Detection
Bag, S. K., Sinha, R. K., Meherwan, Varshney, S. K.
Frontiers in Optics / Laser Science
, 2018, paper JTu3A.94

A Metasurface-inspired Focusing Collector for Concentrated Solar Power Applications
Ding, Q., Barna, S., Jacobs, K., Choubal, A., Mensing, G., Zhang, Z., Yamada, K., Tirawat, R., Kincaid, N., Zhu, G., Wendelin, T., Guo, L. J., Ferreira, P., Toussaint, K. C.
Frontiers in Optics / Laser Science
, 2018, paper JTu3A.14

Biomimetic Microvascular Tissue Phantoms Fabricated with Two-Photon 3D Printing
Horng, H., Liu, Y., Suresh, N., Ghassemi, P., Pfefer, J., Chen, Y.
Frontiers in Optics / Laser Science
, 2018, paper JW3A.118

Carbon-dots Embedded Glass Based Inverse Micropillar Structures by Two-photon Polymerization Process
Das, P., Wan, M., Mukherjee, S., Ray, S. K., Bhaktha, S. B. N.
Frontiers in Optics / Laser Science
, 2018, paper JTu2A.100

A Fish-like Magnetically Propelled Microswimmer Fabricated by 3D Laser Lithography
Liao, P., Li, J., Zhang, S., Sun, D.
2018 IEEE International Conference on Robotics and Automation (ICRA), DOI
: 10.1109/ICRA.2018.8460522

3D printed micro-scale fiber optic probe for intravascular pressure sensing
Poduval, R. K., Coote, J. Mosse, C. A., Finlay, M. C., Papakonstantinou, I., Desjardins, A. E.
Proc. SPIE 10728, Biosensing and Nanomedicine, 2018, DOI:

Additive Manufacturing through Galvanoforming of 3D Nickel Microarchitectures: Simulation-Assisted Synthesis
Schürch, P., Pethö, L., Schwiedrzik, J., Michler, J., Philippe, L.
Advanced Materials Technologies, 2018, DOI:

Mass Sensing in a Liquid Environment Using Nonlinear Self-Excited Coupled-Microcantilevers
Endo, D., Yabuno, H., Yamamoto, Y., Matsumoto, S.
Journal of Microelectromechanical Systems, 2018, DOI:

Soft lithography based on photolithography and two-photon polymerization
Lin, Y., Gao, C., Gritsenko, D., Zhou, R., Xu, J.
Microfluidics and Nanofluidics, 2018, DOI: 1

Fabrication of soft, stimulus-responsive structures with sub-micron resolution via two-photon polymerization of poly(ionic liquid)s
Tudor, A., Delaney, C., Zhang, H., Thompson, A. J., Curto, V. F., Yang, G.-Z., Higgins, M. J., Diamond, D., Florea, L.
Materials Today, 2018, DOI: 10.1016/j.mattod.2018.07.017

A fast and powerful swimming microrobot with a serrated tail enhanced propulsion interface
Li, D., Liu, Y., Yang, Y., Shen, Y.
Nanoscale, 2018,
DOI: 10.1039/c8nr04907f

A 400 GHz Transmitter Integrated with Flip-chiped 3D Printed Horn Antenna with an EIRP of 1.26 dBm
Standaert, A., Reynaert, P.
IEEE/MTT-S International Microwave Symposium - IMS, 2018, DOI: 10.1109/MWSYM.2018.8439273

Cell cycle-dependent force transmission in cancer cells
Panagiotakopoulou, M., Lendenmann, T., Pramotton, F. M., Giampietro, C., Stefopoulos, G., Poulikakos, D., Ferrari, A.
Molecular Biology of the Cell, 2018, DOI:

Possibilities for Fabricating Polmyer Dielectric Laser Accelerator Structures with Additive Manufacturing
Simakov, E. I., Gilbertson, R. D., Herman, M. J., Pilania, G., Shchegolkov, D. Y., Walker, E. M., Weis, E., England, R. J., Wootton, K. P.
9th International Particle Accelerator Conference (IPAC) 2018, DOI:

Natural convection induced by an optically fabricated and actuated microtool with a thermoplasmonic disk
Engay, E., Bunea, A.-I., Chouliara, M., Banas, A., Glückstad, J.
Optics Letters, Vol. 43, Issue 16, 2018, DOI: 10.1364/OL.43.003870

Two-photon-induced stretchable graphene supercapacitors
Thekkekara, L. V., Chen, X., Gu, M.
Scientific Reports 8, 2018, DOI: 10.1038/s41598-018-30194-2

Adaptive liquid crystal microlens array enabled by two-photon polymerization
He, Z., Lee, Y.-H., Chanda, D., Wu, S.-T.
Optics Express, Vol. 26, Issue 16, 2018, DOI: 10.1364/OE.26.021184

Computational design of nanostructural color for additive manufacturing
Auzinger, T., Heidrich, W., Bickel, B.
ACM Transactions on Graphics, 2018, DOI: 10.1145/3197517.3201376

Flexible In-Ga-Zn-O Thin-Film Transistors With Sub-300-nm Channel Lengths Defined by Two-Photon Direct Laser Writing
Petti, L., Greco, E., Cantarella, G., Münzenrieder, N., Vogt, C., Tröster, G.
IEEE Transactions on Electron Devices
, 2018, DOI: 10.1109/TED.2018.2851926

3D Nanoprinted Plastic Kinoform X-Ray Optics
Sanli, U. T., Ceylan, H., Bykova, I., Weigand, M., Sitti, M., Schütz, G., Keskinbora, K.
Adv. Mater. 2018, DOI: 10.1002/adma.201802503

Hybrid integration of silicon photonics circuits and InP lasers by photonic wire bonding
Billah, M. R., Blaicher, M., Hoose, T., Dietrich, P.-I., Marin-Palomo, P., Lindenmann, N., Nesic, A., Hofmann, A., Troppenz, U., Moehrle, M., Randel, S., Freude, W., Koos, C.
Optica, Vol. 5, Issue 7, 2018, DOI: 10.1364/OPTICA.5.000876

Three dimensional photonic circuits in rigid and soft polymers tunable by light
Nocentini, S., Riboli, F., Burresi, M., Martella, D., Parmeggiani, C., Wiersma, D. S.
ACS Photonic, 2018, DOI:

Adding chemically selective substraction to multi-material 3D additive manufacturing
Gräfe, D., Wickberg, A., Zieger, M. M., Wegener, M., Blasco, E., Barner-Kowollik, C.
Nature Communications 9, 2018, DOI: 10.1038/s41467-018-05234-0

Rapid Detection and Trapping of Extracellular Vesicles by Electrokinetic Concentration for Liquid Biopsy on Chip
Cheung, L. S., Sahloul, S., Orozaliev, A., Song, Y.-A.
Micromachines 2018, 9(6), DOI: 10.3390/mi9060306

Artificial System Inspired by Climbing Mechanism of Galium Aparine Fabricated via 3D Laser Lithography
Fiorello, I., Tricinci, O., Mishra, A. K., Tramacere, F., Filippeschi, C., Mazzolai, B.
Living Machines Conference 2018, DOI:

3D printed Polarization Micro-Optics: Fresnel Rhomb printed on an optical fiber
Bertoncini, A., Liberale, C.
Advanced Photonics 2018, DOI: 10.1364/IPRSN.2018.ITh4B.6

Micro-Dumbbells - A Versatile Tool for Optical Tweezers
Lamperska, W., Drobczyński, S., Nawrot, M., Wasylczyk, P., Masajada, J.
Micromachines, 2018, DOI: 10.3390/mi9060277

Development of a magnetic microrobot for carrying and delivering targeted cells
Li, J., Li, X., Luo, T., Wang, R., Liu, C., Chen, S., Li, D., Yue, J., Cheng, S.-H., Sun, D.
Science Robotics, Vol. 3, Issue 19, 2018, DOI: 10.1126/scirobotics.aat8829

Design and preparation of polymer components for microspectrometer on the chip
Jandura, D., Markotan, M., Gaso, P., Pudis, D.
Elektro 2018, DOI:

Integrated (de)multplexer for orbital angular momentum fiber communication
Xie, Z., Gao, S., Lei, T., Feng, S., Zhang, Y., Li, F., Zhang, J., Li, Z., Yuan, X.
Photonics Research, Vol. 6, Issue 7, 2018, DOI: 10.1364/PRJ.6.000743

IP-Dip photoresist surfaces for photonic applications prepared by laser lithography and studies by AFM
Durisova, J., Pudis, D., Goraus, M., Gaso, P.
Applied Surface Science, 2018, DOI:

Highly porous microlattices as ultrathin and efficient impact absorbers
Lai, C. Q., Daraio, C.
International Journal of Impact Engineering, Volume 120, 2018, DOI:

Three-dimensional poroelastic metamaterials with extremely negative or positive effective static volume compressibility
Qu, J., Kadic, M., Wegener, M.
Extreme Mechanics Letters, Volume 22, 2018, DOI:

Impact of node geometry on the effective stiffness of non-slender three-dimensional truss lattice architectures
Portela, C. M., Greer, J. R., Kochmann, D. M.
Extreme Mechanics Letters, Volume 22, 2018, DOI:

Structured ultrasound microscopy
Janjic, J., Kruizinga, P., van der Meulen, P., Springeling, G., Mastik, F., Leus, G., Bosch, J. G., van der Steen, A. F. W., van Soest, G.
Appl. Phys. Lett. 112, 2018, DOI:

Calibration sample for arbitrary metrological characteristics of optical topography measuring instruments
Eifler, M., Hering, J., von Freymann, G., Seewig, J.
Optics Express, Vol. 26, Issue 13, 2018, DOI: 10.1364/OE.26.016609

Bio-Mimicked Silica Architectures Capture Geometry, Microstructure, and Mechanical Properties of Marine Diatoms
Luo, S., Greer, J. R.
Advanced Engineering Materials, 2018, DOI: 10.1002/adem.201800301

Large-scale high-numerical-aperture super-oscillatory lens fabricated by direct laser writing lithography
Ni, H., Yuan, G., Sun, L., Chang, N., Zhang, D., Chen, R., Jiang, L., Chen, H., Gu, Z., Zhao, X.
RSC Advances, 8, 2018, DOI:

In-vitro perforation of the round window membrane via direct 3-D printed microneedles
Aksit, A., Arteaga, D. N., Arriaga, M., Wang, X., Watanabe, H., Kasza, K. E., Lalwani, A. K., Kysar, J. W.
Biomed Microdevices, 2018, DOI: 10.1007/s10544-018-0287-3

Controlling the orientation of a cell-synthesized extracellular matrix by using engineered gelatin-based building blocks
Pennacchio, F. A., Casale, C., Urciuolo, F., Imparato, G., Vecchione, R., Netti, P. A.
Biomaterials Science, 2018, DOI:

Microarchitected Stretching-Dominated Mechanical Metamaterials with Minimal Surface Topologies
Al-Ketan, O., Rezgui, R., Rowshan, R., Du, H., Fang, N. X., Abu Al-Rub, R. K.
Adv. Eng. Mater. 2018, DOI:

Optical properties of woodpile structures for application on the surface of photonic devices
Pudis, D., Goraus, M., Urbancova, P.
Applied Surface Science, 2018, DOI: 10.1016/j.apsusc.2018.05.193

Effect of Heat Accumulation on Femtosecond Laser Reductive Sintering of Mixed CuO/NiO Nanoparticles
Mizoshiri, M., Nishitani, K., Hata, S.
Micromachines, 9(6), 264, 2018, DOI: 10.3390/mi9060264

Manufacturing of the ISO 25178-70 material measures with direct laser writing: a feasibility study
Eifler, M., Hering, J., von Freymann, G., Seewig, J.
Surf. Topogr.: Metrol. Prop. 6
024010, 2018, DOI: 10.1088/2051-672X/aabe18

Approximating gecko setae via direct laser lithography
Tricinci, O., Eason, E. V., Filippeschi, C., Mondini, A., Mazzolai, B., Pugno, N. M., Cutkosky, M. R., Greco, F., Mattoli, V.
Smart Mater. Struct. 27 075009, 2018, DOI: 10.1088/1361-665X/aa9e5f

Sub-10-nm suspended nano-web formation by direct laser writing
Wang, S., Yu, Y., Liu, H., Lim, K. T. P., Srinivasan, B. M., Zhang, Y. W., Yang, J. K. W.
Nano Futures 2, 2018, DOI: 10.1088/2399-1984/aabb94

Surface Chemistry-Mediated Control of Individual Magnetic Helical Microswimmers in a Swarm
Wang, X., Hu, C., Schurz, L., De Marco, C., Chen, X., Pané, S., Nelson, B. J.
ACS Nano, 2018, DOI:

A Subtractive Photoresist Platform for Micro- and Macroscopic 3D Printed Structures
Zieger, M. M., Müller, P., Blasco, E., Petit, C., Hahn, V., Michalek, L., Mutlu, H., Wegener, M., Barner-Kowollik, C.
Advanced Functional Materials, 2018, DOI:

Zero overlap stitching of microlens arrays with two-photon polymerisation
Dehaeck, S., Scheid, B., Lambert, P.
SPIE Photonics Europe, Proceedings Vol. 10675, 3D Printed Optics and Additive Photonic Manufacturing, 2018, DOI:

Kinematic fixtures to enable multi-material printing and rapid non-destructive inspection during two-photon lithography
Saha, S. K., Uphaus, T. M., Cuadra, J. A., Divin, C., Ladner, I. S., Enstrom, K. G., Panas, R. M.
Precision Engineering, 2018, DOI:

Surface-relief Bragg grating waveguides based on IP-Dip polymer for photonic applications
Goraus, M., Pudis, D., Urbancova, P., Martincek, I., Gaso, P.
Applied Surface Science, 2018, DOI:

Microfluidic cell sorting: Towards improved biocompatibility of extracorporeal lung assist devices
Bleilevens, C., Lölsberg, J., Cinar, A., Knoben, M., Grottke, O., Rossaint, R., Wessling, M.
Scientific Reports 8, 2018, DOI:

Scanning photocurrent microscopy of 3D printed light trapping structures in dye-sensitized solar cells
Knott, A., Makarovskiy, O., O'Shea, J., Wu, Y., Tuck, C.
Solar Energy Materials and Solar Cells, Volume 180, 2018, DOI:

In situ fabricated 3D micro-lenses for photonic integrated circuits
Thomas, R., Li, J., Ladak, S., Barrow, D., Smowton, P. M.
Opt. Express 26
, 2018, DOI: 10.1364/OE.26.013436

Micro-scale fiber-optic force sensor fabricated using direct laser writing and calibrated using machine learning
Thompson, A. J., Power, M., Yang, G.-Z.
Opt. Express 26, 2018,
DOI: 10.1364/OE.26.014186

3D-Printed Ultra-Broadband Highly Efficient Out-of-Plane Couple for Photonic Integrated Circuits
Blaicher, M., Billah, M. R., Hoose, T., Dietrich, P.-I., Hofmann, A., Randel, S., Freude, W., Koos, C.
Conference on Lasers and Electro-Optics, 2018, paper STh1A.1, DOI: 10.1364/CLEO_SI.2018.STh1A.1

Structured Optical Materials Controlled by Light
Nocentini, S., Martella, D., Parmeggiani, C., Zanotto, S., Wiersma, D. S.
Advanced Optical Materials, 2018, DOI: 10.1002/adom.201800167

3D photonic structure for plug-and-play fiber to waveguide coupling
Jimenez Gordillo, O. A., Tadayon, M. A., Chang, Y.-C., Lipson, M.
Conference on Lasers and Electro-Optics
, 2018, paper STh4B.7, DOI: 10.1364/CLEO_SI.2018.STh4B.7

3D printed microchannels for sub-nL NMR spectroscopy
Montinaro, E., Grisi, M., Letizia, M. C., Pethö, L., Gijs, M. A. M., Guidetti, R., Michler, J., Brugger, J., Boero, G.
PLoS ONE 13(5): e0192780, DOI: 10.1371/journal.pone.0192780

Tunable Infrared Metasurface on a Soft Polymer Scaffold
Reeves, J. B., Jayne, R. K., Stark, T. J., Barrett, L. K., White, A. E., Bishop, D. J.
Nano Lett., DOI:

On-chip multimodal vortex trap micro-manipulator with multistage bi-helical micro-swimmer
Paris, A., Decanini, D., Hwang, G.
Sensors and Actuators A: Physical, 2018, DOI:

Optical fiber micro-connector with nanometer positioning precision for rapid prototyping of photonic devices
Bogucki, A., Zinkiewicz, L., Pacuski, W., Wasylczyk, P., Kossacki, P.
Optics Express, Issue 9, 2018, DOI:

A RAB35-p85/PI3K axis controls oscillatory apical protrusions required for efficient chemotactic migration
Salvatore, C., Malinverno, C., Neumann, B., Tischer, C., Palamidessi, A., Frittoli, E., Panagiotakopoulou, M., Disanza, A., Malet-Engra, G., Nastaly, P., Galli, C., Luise, C., Bertalot, G., Pece, S., Di Fiore, P., Gauthier, N., Ferrari, A., Maiuri, P., Scita, G.
Nature Communications 9, 2018, DOI:

3-D Printed Biocompatible Micro-Bellows Membranes
Moussi, K., Kosel, J.
Journal of Microelectromechanical Systems, 2018, DOI: 10.1109/JMEMS.2018.2819994

3D nanofabrication inside rapid prototyped microfluidic channels showcased by wet-spinning of single micrometre fibres
Lölsberg, J., Linkhorst, J., Cinar, A., Jans, A., Kuehne, A. J. C., Wessling, M.
Lab Chip, 2018, DOI: 10.1039/C7LC01366C

3D Printing of Bioinspired Liquid Superrepellent Structures
Liu, X., Gu, H., Wang, M., Du, X., Gao, B., Elbaz, A., Sun, L., Liao, J., Xiao, P., Gu, Z.
Advanced Materials, 2018, DOI: 10.1002/adma.201800103

Design and Realization of 3D Printed AFM Probes
Alsharif, N., Burkatovsky, A., Lissandrello, C., Jones, K. M., White, A. E., Brown, K. A.
Small, 2018, DOI: 10.1002/smll.201800162

Carbon fiber on polyimide ultra-microelectrodes
Gillis, W. F., Lissandrello, C. A., Shen, J., Pearre, B. W., Mertiri, A., Deku, F., Cogan, S., Holinski, B. J., Chew, D. J., White, A. E.
J. Neural Eng., 2018, DOI:

Fabrication of Low-Density Shock-Propagation Targets Using Two-Photon Polymerization
Stein, O., Liu, Y., Streit, J., Campbell, J. H., Lu, Y. F., Aglitskiy, Y., Petta, N.
Fusion Science and Technology, 2018,
DOI: 10.1080/15361055.2017.1406237

Three techniques for the fabrication of high precision, mm-sized metal components based on two-photon lithography, applied for manufacturing horn antennas for THz transceivers
Standaert, A., Brancato, L., Lips, B., Ceyssens, F., Puers, R., Reynaert, P.
J. Micromech. Microeng., 2018, DOI: 10.1088/1361-6439/aaa74b

Adaptive Stitching for Meso-Scale Printing with Two-Photon Lithography
Dehaeck, S., Scheid, B., Lambert, P.
Additive Manufacturing, 2018, DOI: 10.1016/j.addma.2018.03.026

Grating based high-frequency ultrasonic sensors
Wei, H., Amrithanath, A. K., Krishnaswamy, S.
Proc. SPIE 10598, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2018, DOI: 10.1117/12.2296335

In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration
Dietrich, P.-I., Blaicher, M., Reuter, I., Billah, M., Hoose, T., Hofmann, A., Caer, C., Dangel, R., Offrein, B., Troppenz, U., Moehrle, M., Freude, W., Koos, C.
Nature Photonics
, 2018, DOI: 10.1038/s41566-018-0133-4

Diamagnetically levitated Milli-robots for heterogeneous 3D assembly
Hsu, A., Chu, W., Cowan, C., McCoy, B., Wong-Foy, A., Pelrine, R., Lake, J., Ballard, J., Randall, J.
Journal of Micro-Bio Robotics, 2018, DOI: 10.1007/s12213-018-0103-4

3D computer-aided nanoprinting for solid-state nanopores
Ding, H., Zhang, Q., Gu, Z., Gu, M.
Nanoscale Horiz., 2018, DOI: 10.1039/c8nh00006a

Improved development procedure to enhance the stability of microstructures created by two-photon polymerization
Purtov, J., Verch, A., Rogin, P., Hensel, R.
Microeletronic Engineering, 2018, DOI: 10.1016/j.mee.2018.03.009

Direct laser fabrication of free-standing PEGDA-hydrogel scaffolds for neuronal cell growth: Engineering 3D biocompatible microenvironments
Accardo, A., Blatché, M.-C., Courson, R., Loubinoux, I., Vieu, C., Malaquin, L.
Materials Today, 2018, DOI:

3D Printed Phantoms of Retinal Photoreceptor Cells for Evaluating Adaptive Optics Imaging Modalities
Kedia, N., Liu, Z., Sochol, R., Hammer, D. X., Agrawal, A.
Proceedings Volume 10474, Ophthalmic Technologies XXVIII; 104740D, 2018, DOI: 10.1117/12.2291759

Atomic layer deposition of 2D and 3D standards for synchrotron-based quantitative composition and structure analysis methods
Becker, N. G., Butterworth, A. L., Salome, M., Sutton, S. R., De Andrade, V., Sokolov, A., Westphal, A. J., Proslier, T.
Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 36, 2018, DOI: 10.1116/1.5025240

A Monolithic Force-Sensitive 3D Microgripper Fabricated on the Tip of an Optical Fiber Using 2-Photon Polymerization
Power, M., Thompson, A. J., Anastasova, S., Yang, G.-Z.
Small, 2018, DOI: 10.1002/smll.201703964

Light robotics: a new field of research
Engay, E., Chouliara, M., Bañas, A., Separa, S. D., Glückstad, J.
Proc. SPIE 10549, Complex Light and Optical Forces XII, 2018, DOI:

Two-photon laser lithography in optical metrology
Hering, J., Eifler, M., Hofherr, L., Ziegler, C., Seewig, J., von Freymann, G.
Proc. SPIE 10544, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XI, 2018, DOI:

Femtosecond laser direct writing of Cu-based fine patterns using Cu2O nanospheres
Kondo, Y., Mizoshiri, M., Sakurai, J., Hata, S.
Proc. SPIE 10520, Laser-based Micro- and Nanoprocessing XII, 2018, DOI: 10.1117/12.2287686

Two-photon lithography and microscopy of 3D hydrogel scaffolds for neuronal cell growth
Accardo, A., Blatché, M.-C., Courson, R., Loubinoux, I., Vieu, C., Malaquin, L.
Biomed. Phys. Eng. Express 4, 2018, DOI: 10.1088/2057-1976/aaab93

A Capsule-Type Microrobot with Pick-and-Drop Motion for Targeted Drug and Cell Delivery
Lee, S., Kim., S., Kim., S., Kim., J.-Y., Moon, C., Nelson, B. J., Choi, H.
Adv. Healthcare Mater. 2018, DOI:

Three-Dimensional Printed Polymer Waveguides for Whispering Gallery Mode Sensors
Wei, H., Amrithanath, A. K., Krishnaswamy, S.
IEEE Photonics Technology Letters
, Vol. 30, No. 5, 2018, DOI: 10.1109/LPT.2018.2798539

3D Biomimetic Magnetic Structures for Static Magnetic Field Stimulation of Osteogenesis
Paun, I. A., Popescu, R. C., Calin, B. S., Mustaciosu, C. C., Dinescu, M., Luculescu, C. R.
Int. J. Mol. Sci.
2018, 19(2), 495, DOI: 10.3390/ijms19020495

Additive manufacturing of 3D nano-architected metals
Vyatskikh, A., Delalande, S., Kudo, A., Zhang, X., Portela, C. M., Greer, J. R.
Nature Communications
, Volume 9, 2018, DOI: 10.1038/s41467-018-03071-9

Laser-direct writing by two-photon polymerization of 3D honeycomb-like structures for bone regeneration
Paun, I. A., Popescu, R. C., Mustaciosu, C. C., Zamfirescu, M., Calin, B. S., Mihailescu, M., Dinescu, M., Popescu, A., Chioibasu, D., Soproniy, M., Luculescu, C. R.
Biofabrication 10, 2018, DOI: 10.1088/1758-5090/aaa718

Deformation behavior and energy absorption capability of polymer and ceramic-polymer composite microlattices under cyclic loading
Schroer, A., Wheeler, J. M., Schwaiger, R.
Journal of Materials Research, 2018, DOI: 10.1557/jmr.2017.485

3D laser lithographic fabrication of hollow microneedle mimicking mosquitos and its characterisation
Suzuki, M., Takahashi, T., Aoyagi, S.
Int. J. Nanotechnol., Vol. 15, 2018, DOI: 10.1504/IJNT.2018.089545

Beyond 100 nm resolution in 3D laser lithography - Post processing solutions
Seniutinas, G., Weber, A., Padeste, C., Sakellari, I., Farsari, M., David, C.
Microelectronic Engineering, Vol. 191, 2018, DOI: 10.1016/j.mee.2018.01.018

Dynamic Actuation of Soft 3D Micromechanical Structures Using Micro-Electromechanical Systems (MEMS)
Jayne, R. K., Stark, T. J., Reeves, J. B., Bishop, D. J., White, A. E.
Adv. Mater. Technol. 2018, 1700293. DOI: 10.1002/admt.201700293

Near-Infrared Light-Sensitive Polyvinyl Alcohol Hydrogel Photoresist for Spatiotemporal Control of Cell-Instructive 3D Microenvironments
Qin, X.-H., Wang, X., Rottmar, M., Nelson, B. J., Maniura-Weber, K.
Adv. Mater. 2018
, DOI: 10.1002/adma.201705564

Benchmarking surface selective vacuum ultraviolet and thermal postprocessing of thermoplastics for ultrasmooth 3-D-printed micro-optics
Kirchner, R., Chidambaram, N., Schift, H.
Opt. Eng. 57(4), 2018, DOI: 10.1117/1.OE.57.4.041403

Maskless 3D Ablation of Precise Micro-hole Structures in Plastics Using Femtosecond Laser Pulses
Liao, C., Anderson, W., Antaw, F., Trau, M.
ACS Applied Materials & Interfaces, 2018, DOI: 10.1021/acsami.7b18029

The Rotation of Microrobot Simplifies 3D Control Inside Microchannels
Barbot, A., Decanini, D., Hwang, G.
Scientific Reports
 8, 2018, DOI: 10.1038/s41598-017-18891-w

Tunable mechanical properties of stent-like microscaffolds for studying cancer cell recognition of stiffness gradients
Lemma, E. D., Sergio, S., Spagnolo, B., Pisanello, M., Algieri, L., Coluccia, M. A., De Vittorio, M., Pisanello, F.
Microelectronic Engineering, Volume 190, 2018, DOI: 10.1016/j.mee.2018.01.007

Aluminium nanostructures with strong visible-range SERS activity for versatile micropatterning of molecular security labels
Lay, C. L., Koh, C. S. L., Wang, J., Lee, Y. H., Jiang, R., Yang, Y., Yang, Z., Phang, I. Y., Ling, X. Y.
Nanoscale, 2018, DOI: 10.1039/C7NR07793A

Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries
Zekoll, S., Marriner-Edwards, C., Hekselman, A. K. O., Kasemchainan, J., Kuss, C., Armstrong, D. E. J., Cai, D., Wallace, R. J., Richter, F. H., Thijssen, J. H. J., Bruce, P. G.
Energy Environ. Sci., 2018, DOI: 10.1039/c7ee02723k


Integrated Mach-Zehnder interferometer on the end facet of multicore fiber for refractive index sensing application
Qi, Y., Zhang, S., Feng, S., Wang, X., Sun, W., Ye, J., Han, P., Zhang, Y.
2017 International Conference on Optical Instruments and Technology: IRMMW-THz Technologies and Applications, DOI: 10.1117/12.2302441

Lithographic Printing Via Two-Photon Polymerization of Engineered Foams
Herman, M. J., Peterson, D., Henderson, K., Cardenas, T., Hamilton, C. E., Oertel, J., Patterson, B. M.
Fusion Science and Technology, 2017, DOI: 10.1080/15361055.2017.1387454

Confocal imaging characterization of two-photon lithography microstructures for cell cultures
Lemma, E. D., Spagnolo, B., Sergio, S., Pisanello, M., De Vittorio, M., Pisanello, F.
IEEE 17th International Conference on Nanotechnology (IEEE-NANO), 2017, DOI: 10.1109/NANO.2017.8233602

Surface smoothening of the inherent roughness of micro-lenses fabricated with 2-photon lithography
Schift, H., Kirchner, R., Chidambaram, N., Altana, M.
Proc. SPIE 10456, Nanophotonics Australasia 2017, 104561Z (2 January 2018); DOI: 10.1117/12.2283236

A 3D Real-Scale, Biomimetic, and Biohybrid Model of the Blood-Brain Barrier Fabricated through Two-Photon Lithography
Marino, A., Tricinci, O., Battaglini, M., Filippeschi, C., Mattoli, V., Sinibaldi, E., Ciofani, G.
Small 2017, DOI: 10.1002/smll.201702959

3D Microstructured Azobenzene-Containing Gelatin as Photoactuable Cell Confining System
Pennacchio, F. A., Fedele, C., De Martino, S., Cavalli, S., Vecchione, R., Netti, P. A.
ACS Appl. Mater. Interfaces, 2017, DOI: 10.1021/acsami.7b13176

Rainbow peacock spiders inspire miniature super-iridescent optics
Hsiung, B.-K., Siddique, R. H., Stavenga, D. G., Otto, J. C., Allen, M. C., Liu, Y., Lu, Y.-F., Deheyn, D. D., Shawkey, M. D., Blackledge, T. A.
Nature Communications 8, 2017, DOI: 10.1038/s41467-017-02451-x

Polarization-independent phase modulators enabled by two-photon polymerization
He, Z., Lee, Y.-H., Gou, F., Franklin, D., Chanda, D., Wu, S.-T.
Opt. Express 25, 2017, DOI: 10.1364/OE.25.033688

Air Trapping Mechanism in Artificial Salvinia-Like Micro-Hairs Fabricated via Direct Laser Lithography
Tricinci, O., Terencio, T., Pugno, N. M., Greco, F., Mazzolai, B., Mattoli, V.
2017, 8(12), 366; DOI: 10.3390/mi8120366

A 100,000 Scale Factor Radar Range
Blanche, P.-A., Neifeld, M., Peyghambarian, N.
Scientific Reports
 7, 2017, DOI: 10.1038/s41598-017-18131-1

An Implantable Micro-Caged Device for Direct Local Delivery of Agents
Son, A. I., Opfermann, J. D., McCue, C., Ziobro, J., Ill, J. H. A., Jones, K., Morton, P. D., Ishii, S., Oluigbo, C., Krieger, A., Liu, J. S., Hashimoto-Torii, K., Torii, M.
Scientific Reports 7, 2017, DOI: 10.1038/s41598-017-17912-y

Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction
Hu, Q., Sun, X.-Z., Parmenter, C. D. J., Fay, M. W., Smith, E. F., Rance, G. A., He, Y., Zhang, F., Liu, Y., Irvine, D., Tuck, C., Hague, R., Wildman, R.
Scientific Reports 7, 2017, DOI: 10.1038/s41598-017-17391-1

Evaluating sputter deposited metal coatings on 3D printed polymer micro-truss structures

Juarez, T., Schroer, A., Schwaiger, R., Hodge, A. M.
Materials & Design, 2017, DOI: 10.1016/j.matdes.2017.12.005

Impact of complex surfaces on biomicrorheological measurements using optical tweezers
Zhang, S., Gibson, L. J., Stilgoe, A. B., Nieminen, T. A., Rubinsztein-Dunlop, H.
Lab Chip, 2017, DOI: 10.1039/c7lc01176h

Sperm-Hybrid Micromotor for Targeted Drug Delivery
Xu, H., Medina-Sánchez, M., Magdanz, V., Schwarz, L., Hebenstreit, F., Schmidt, O. G.
ACS Nano, DOI: 10.1021/acsnano.7b06398

Experiments on Metamaterials with Negative Effective Static Compressibility
Qu, J., Gerber, A., Mayer, F., Kadic, M., Wegener, M.
Phys. Rev. X 7, 041060, DOI: 10.1103/PhysRevX.7.041060

Stereo-holographic diffraction based tracking of microrobots
Mohanty, S., Hong, A., Alcantara, C., Petruska, A. J., Nelson, B. J.
IEEE Robotics and Automation Letters, 2017, DOI
: 10.1109/LRA.2017.2775700

Radiopaque Resists for Two-Photon Lithography To Enable Submicron 3D Imaging of Polymer Parts via X-ray Computed Tomography
Saha, S. K., Oakdale, J. S., Cuadra, J. A., Divin, C., Ye, J., Forien, J.-B., Aji, L. B. B., Biener, J., Smith, W. L.
ACS Appl. Mater. Interfaces, 2017, DOI: 10.1021/acsami.7b12654

Control of light by curved space in nanophotonic structures
Bekenstein, R., Kabessa, Y., Sharabi, Y., Tal, O., Engheta, N., Eisenstein, G., Agranat, A. J., Segev, M.
Nature Photonics
 11, 664–670 (2017), DOI: 10.1038/s41566-017-0008-0

New design model for high efficiency cylindrical diffractive microlenses
Li, Y., Zhao, H., Feng, S.-F., Ye, J.-S., Wang, X.-K., Sun, W.-F., Han, P., Zhang, Y.
Scientific Reports 7, Article number: 16334 (2017
), DOI: 10.1038/s41598-017-14787-x

The role of hierarchical design and morphology in the mechanical response of diatom-inspired structures via simulation
Gutiérrez, A., Guney, M. G., Fedder, G. K., Dávila, L. P.
Biomater. Sci., 2017
, DOI: 10.1039/c7bm00649g

Two-photon polymerization enabled multi-layer liquid crystal phase modulator
Lee, Y.-H., Franklin, D., Gou, F., Liu, G., Peng, F., Chanda, D., Wu, S.-T.
Scientific Reports
 7, Article number: 16260 (2017), DOI: 10.1038/s41598-017-16596-8

Three-dimensional mechanical metamaterials with a twist
Frenzel, T., Kadic, M., Wegener, M.
Science Vol. 358, Issue 6366, 2017, DOI: 10.1126/science.aao4640

Light polarization management via reflection from arrays of sub-wavelength metallic twisted bands
Nawrot, M., Haberko, J., Zinkiewicz, Ł., Wasylczyk, P.
Appl. Phys. B, 2017, DOI: 10.1007/s00340-017-6864-y

Tailoring lens functionaility by 3D laser printing
Lightman, S., Hurvitz, G., Gvishi, R., Arie, A.
Appl. Opt. 56, 2017, DOI: 10.1364/AO.56.009038

A Simple Planar Focusing Collector for Concentrated Solar Power Applications
Ding, Q., Jacobs, K., Choubal, A., Mensing, G., Zhang, Z., Tirawat, R., Zhu, G., Wendelin, T., Guo, L. J., Ferreira, P., Toussaint Jr., K.
Light, Energy and the Environment
, Optics for Solar Energy 2017, DOI: 10.1364/OSE.2017.RM2C.3

Microenvironmental Stiffness of 3D Polymeric Structures to Study Invasive Rates of Cancer Cells
Lemma, E. D., Spagnolo, B., Rizzi, F., Corvaglia, S., Pisanello, M., De Vittorio, M., Pisanello, F.
Adv. Healthcare Mater. 2017
, DOI: 10.1002/adhm.201700888

Development of a microfluidic platform integrating high-resolution microstructured biomaterials to study cell-material interactions
Barata, D., Provaggi, E., van Blitterswijk, C., Habibovic, P.
Lab Chip, 2017, DOI:

Silyl-based initiators for two-photon polymerization: from facile synthesis to quantitative structure-activity relationship analysis
Li, Z., Rosspeintner, A., Hu, P., Zhu, G., Hu, Y., Xiong, X., Peng, R., Wang, M., Liu, X., Liu, R.
Polym. Chem., 2017, DOI: 10.1039/C7PY01360D

Lotus-on-chip: computer-aided design and 3D direct laser writing of bioinspired surfaces for controlling the wettability of materials and devices
Lantada, A. D., Hengsbach, S., Bade, K.
Bioinspir. Biomim.2017, DOI: 10.1088/1748-3190/aa82e0

Direct Metal Writing and Precise Positioning of Gold Nanoparticles within Microfluidic Channels for SERS Sensing of Gaseous Analytes
Lee, M. R., Lee, H. K., Yang, Y., Koh, C. S. L., Lay, C. L., Lee, Y. H., Phang, I. Y., Ling, X. Y.
ACS Appl. Mater. Interfaces, DOI: 10.1021/acsami.7b11649

High-fidelity replication of thermoplastic microneedles with open microfluidic channels
Rad, Z. F., Nordon, R. E., Anthony, C. J., Bilston, L., Prewett, P. D., Arns, J.-Y., Arns, C. H., Zhang, L., Davies, G. J.
Microsystems & Nanoengineering, 2017, DOI: 10.1038/micronano.2017.34

Photonic Microhand with Autonomous Action
Martella, D., Nocentini, S., Nuzhdin, D., Parmeggiani, C., Wiersma, D. S.
Adv. Mater. 2017, DOI: 10.1002/adma.201704047

Polarization-independent asymmetric light transmission in all-dielectric photonic structures
Zinkiewicz, L., Nawrot, M., Haberko, J., Wasylczyk, P.
Optical Materials, Volume 73, 2017, DOI: 10.1016/j.optmat.2017.08.046

Mode-group mixing device via complex phase masks printed on fiber tip
Blau, M., Rosenfeld, M., Alvarado Zacarias, J. C., Correa, R. A., Marom, D. M.
2017 International Conference on Optical MEMS and Nanophotonics (OMN), DOI
: 10.1109/OMN.2017.8051463

Fabrication and Performance Analysis of Mach-Zehnder Interferometer Coupley Polymer Microring Resonator with Microfluidic Channel for Refractive-Index Sensing
Bag, S. K., Haldar, R., Wan, M., Varshney, S. K.
Frontiers in Optics 2017
, DOI: 10.1364/FIO.2017.FW6C.3

Direct Laser Writing of Low-Density Interdigitated Foams for Plasma Drive Shaping
Oakdale, J. S., Smith, R. F., Forien, J.-B., Smith, W. L., Ali, S. J., Aji, L. B. B., Willey, T. M., Ye, J., van Buuren, A. W., Worthington, M. A., Prisbrey, S. T., Park, H.-S., Amendt, P. A., Baumann, T. F., Biener, J.
Adv. Funct. Mater. 2017,
DOI: 10.1002/adfm.201702425

Harnessing Photochemical Shrinkage in Direct Laser Writing for Shape Morphing of Polymer Sheets
Bauhofer, A. A., Krödel, S., Rys, J., Bilal, O. R., Constantinescu, A., Daraio, C.
Adv. Mater. 2017, DOI:

Flexible Three-Dimensional Anti-Counterfeiting Plasmonic Security Label: Utilizing Z-Axis-Dependent SERS Readouts to Encode Multi-Layered Molecular Information
Liu, Y., Lee, Y. H., Lee, M. R., Yang, Y., Ling, X. Y.
ACS Photonics
, 2017, DOI: 10.1021/acsphotonics.7b00796

Custom-Designed Glassy Carbon Tips for Atomic Force Microscopy
Zakhurdaeva, A., Dietrich, P.-I., Hölscher, H., Koos, C., Korvink, J. G., Sharma, S.
2017, 8(9), 285; DOI: 10.3390/mi8090285

Three-dimensional nano-architected scaffolds with tunable stiffness for efficient bone tissue growth
Maggi, A., Li, H., Greer, J. R.
Acta Biomaterialia, 2017, DOI:

3D Fluorescence-Based Security Features by 3D Laser Lithography
Mayer, F., Richter, S., Hübner, P., Jabbour, T., Wegener, M.
Advanced Materials Technologies, 2017, DOI: 10.1002/admt.201700212

Micrometer-thickness liquid sheet jets flowing in vacuum
Galinis, G., Strucka, J., Barnard, J. C. T., Braun, A., Smith, R. A., Marangos, J. P.
Review of Scientific Instruments 88, 2017, DOI: 10.1063/1.4990130

Reexamining the mechanical property space of three-dimensional lattice architectures
Meza, L. R., Phlipot, G., Portela, C. M., Maggi, A., Montemayor, L. C., Comella, A., Kochmann, D. M., Greer, J. R.
Acta Materialia, 2017, DOI: 10.1016/j.actamat.2017.08.052

3D-Printed Vision-Based Micro-Force Sensor Dedicated to In Situ SEM Measurements
Guelpa, V., Prax, J.-S., Vitry, Y., Lehmann, O., Dehaeck, S., Sandoz, P., Clévy, C., Le Fort-Piat, N., Lambert, P., Laurent, G. J.
2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), DOI:

Rapidly prototyping biocompatible surfaces with designed wetting properties via photolithography and plasma polymerization
Berwind, M. F., Hashibon, A., Fromm, A., Gurr, M., Burmeister, F., Eberl, C.
Microfluidics and Nanofluidics, 2017, DOI:

Polymer Microstructures through Two-Photon Crosslinking
Schwärzle, D., Hou, X., Prucker, O., Rühe, J.
Adv. Mater. 2017
, DOI: 10.1002/adma.201703469

Single mode fiber based delivery of OAM light by 3D direct laser writing
Weber, K., Hütt, F., Thiele, S., Gissibl, T., Herkommer, A., Giessen, H.
Opt. Express 25
, (2017), DOI: 10.1364/OE.25.019672

Funnel-Shaped Microstructures for Strong Reversible Adhesion
Fischer, S. C. L., Groß, K., Abad, O. T., Becker, M. M., Park, E. Hensel, R., Arzt, E.
Adv. Mater. Interfaces 2017
, DOI: 10.1002/admi.201700292

In-Gel Direct Laser Writing for 3D-Designed Hydrogel Composites That Undergo Complex Self-Shaping
Nishiguchi, A., Mourran, A., Zhang, H., Möller, M.
Advanced Science, 2017, DOI: 10.1002/advs.201700038

Passive Pump Based on Capillary Force Generated by Gaps between Microbeads for Blood Collection via Microneedle
Suzuki, M., Takahashi, T., Aoyagi, S.
2017 19th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 2017, DOI: 10.1109/TRANSDUCERS.2017.7994392

Tension and Elasticity Contribute to Fibroblast Cell Shape in Three Dimensions
Brand, C. A., Linke, M., Weißenbruch, K., Richter, B., Bastmeyer, M., Schwarz, U. S.
Biophysical Journal, 2017, DOI: 10.1016/j.bpj.2017.06.058

Towards hybrid microrobots using pH- and photo-responsive hydrogels for cancer targeting and drug delivery
Power, M., Anastasova, S., Shanel, S., Yang, G.-Z.
2017 IEEE International Conference on Robotics and Automation (ICRA), 2017, DOI: 10.1109/ICRA.2017.7989709

Printed freeform lens arrays on multi-core fibers for highly efficient coupling in astrophotonic systems
Dietrich, P.-I., Harris, R. J., Blaicher, M., Corrigan, M. K., Morris, T. M., Freude, W., Quirrenbach, A., Koos, C.
Optics Express Vol. 25, Issue 15, 2017, DOI: 10.1364/OE.25.018288

Dry Adhesion of Artificial Gecko Setae Fabricated via Direct Laser Lithography
Tricinci, O., Eason, E. V., Filippeschi, C., Mondini, A., Mazzolai, B., Pugno, N. M., Cutkosky, M. R., Greco, F., Mattoli, V.
Living Machines 2017, LNAI 10384, 2017, DOI: 10.1007/978-3-319-63537-8_60

Two-photon lithography for 3D magnetic nanostructure fabrication
Williams, G., Hunt, M., Boehm, B., May, A., Taverne, M., Ho, D., Giblin, S., Read, D., Rarity, J., Allenspach, R., Ladak, S.
Nano Research, 2017, DOI: 10.1007/s12274-017-1694-0

Laser-Printing and 3D Optical-Control of Untethered Microrobots
Avci, E., Grammatikopoulou, M., Yang, G.-Z.
Advanced Optical Materials, 2017, DOI: 10.1002/adom.201700031

3D Printing of Regenerated Silk Fibroin and Antibody-Containing Microstructures via Multi-Photon Lithography
Dickerson, M. B., Dennis, P. B., Tondiglia, V. P., Nadeau, L. J., Singh, K. M., Drummy, L. F., Partlow, B. P., Brown, D. P. Omenetto, F. G., Kaplan, D. L., Naik, R. R.
ACS Biomater. Sci. Eng., 2017, DOI: 10.1021/acsbiomaterials.7b00338

Synthetic Moth Antennae Fabricated as Preconcentrator for Odor Collection
Spencer, T., Lavrik, N., Hu, D.
ISOEN/IEEE International Symposium on Olfaction and Electronic Nose, 2017, DOI: 10.1109/ISOEN.2017.7968911

Prototyping and Replication of Polymer Freeform Optical Components
Van Erps, J., Vervaeke, M., Duerr, F., Thienpont, H.
Optical Design and Fabrication 2017 (Freeform, IODC, OFT), DOI: 10.1364/OFT.2017.OM4B.2

All-Angle Invisibility Cloaking of Contact Fingers on Solar Cells by Refractive Free-Form Surfaces
Schumann, M. F., Langenhorst, M., Smeets, M., Ding, K., Paetzold, U. W., Wegener, M.
Advanced Optical Materials 2017, DOI: 10.1002/adom.201700164

Rapid Three-Dimensional Printing in Water Using Semiconductor-Metal Hybrid Nanoparticles as Photoinitiators
Pawar, A. A., Halivni, S., Waiskopf, N., Ben-Shahar, Y., Soreni-Harari, M., Bergbreiter, S., Banin, U., Magdassi, S.
Nano Lett., 2017, DOI: 10.1021/acs.nanolett.7b01870

3D Chiral Plasmonic Metamaterials Fabricated by Direct Laser Writing: The Twisted Omega Particle
Sakellari, I., Yin, X., Nesterov, M. L., Terzaki, K., Xomalis, A., Farsari, M.
Advanced Optical Materials, 2017, DOI: 10.1002/adom.201700200

Ion beam etching of multilevel masking layers written by two-photon lithography
Schmitt, J., Hengsbach, S., Bade, K., Wallrabe, U., Völklein, F.
J. Micromech. Microeng. 27, 2017, DOI: 10.1088/1361-6439/aa6e8f

Refractive index measurements of photo-resists for three-dimensional direct laser writing
Gissibl, T., Wagner, S., Sykora, J., Schmid, M., Giessen, H.
Optics Materials Express, Vol. 7, Issue 7, 2017, DOI: 10.1364/OME.7.002293

3D Laser Micro- and Nano-Printing: Challenges for Chemistry
Barner-Kowollik, C., Bastmeyer, M., Blasco, E., Mueller, P., Delaittre, G., Richter, B., Wegener, M.
Angew. Chem. Int. Ed., 2017 DOI: 10.1002/anie.201704695

Fiber-based temperature microsensor by using three-dimensional photomask
Kim, Y., Zhang, Y., Hayase, M.
Jpn. J. Appl. Phys. 56, 2017, DOI: 10.7567/JJAP.56.06GG13

Stress relaxation in polymeric microlattice materials
Krödel, S., Li, L., Constantinescu, A., Daraio, C.
Materials & Design, Vol. 130, 2017, DOI: 10.1016/j.matdes.2017.05.060

Multiphoton Direct Laser Writing and 3D Imaging of Polymeric Freestanding Architectures for Cell Colonization
Accardo, A., Blatché, M.-C., Courson, R., Loubinoux, I., Thibault, C., Malaquin, L., Vieu, C.
2017, DOI: 10.1002/smll.201700621

Lateral Trapezoid Microfluidic Platform for Investigating Mechanotransduction of Cells to Spatial Shear Stress Gradients
Soffe, R., Baratchi, S., Nasabi, M., Tang, S.-Y., Boes, A., McIntyre, P., Mitchell, A., Khoshmanesh, K.
Sensors and Actuators B: Chemical, 2017, DOI: 10.1016/j.snb.2017.05.145

Dynamic and programmable self-assembly of micro-rafts at the air-water interface
Wang, W., Giltinan, J., Zakharchenko, S., Sitti, M.
Sci. Adv. 2017, 3, DOI: 10.1126/sciadv.1602522

3D nano-architected metallic glass: Size effect suppresses catastrophic failure
Liontas, R., Greer, J. R.
Acta Materialia (2017), DOI: 10.1016/j.actamat.2017.05.019

A micro-scale printable nanoclip for electrical stimulation and recording in small nerves
Lissandrello, C. A., Gillis, W. F., Shen, J., Pearre, B. W., Vitale, F., Pasquali, M., Holinski, B. J., Chew, D. J., White, A. E., Gardner T. J.
J Neural Eng. 2017, 14 (3), DOI: 10.1088/1741-2552/aa5a5b

3D high-resolution two-photon crosslinked hydrogel structures for biological studies
Brigo, L., Urciuolo, A., Giulitti, S., Giustina, G. D., Tromayer, M., Liska, R., Elvassore, N., Brusatin, G.
Acta Biomaterialia, 2017, DOI: 10.1016/j.actbio.2017.03.036

Two-photon polymerization for production of human iPSC-derived retinal cell grafts
Worthington, K. S., Wiley, L. A., Kaalberg E. E., Collins, M. M., Mullins, R. F., Stone, E. M., Tucker, B. A.
Acta Biomaterialia, 2017, DOI: 10.1016/j.actbio.2017.03.039

Silicon heterojunction solar cells with effectively transparent front contacts
Saive, R., Boccard, M., Saenz, T., Yalamanchili, S., Bukowsky, C. R., Jahelka, P., Yu, Z. J., Shi, J., Holman, Z., Atwater, H. A.
Sustainable Energy Fuels, 2017, Advance Article, DOI: 10.1039/c7se00096k

Infiltrated photonic crystals for light-trapping in CuInSe2 nanocrystal-based solar cells
Dottermusch, S., Quintilla, A., Gomard, G., Roslizar, A., Voggu, V. R., Simonsen, B. A., Park, J. S., Pernik, D. R., Korgel, B. A., Paetzold, U. W., Richards, B. S.
Opt. Express 25, 2017, DOI: 10.1364/OE.25.00A502

Simultaneous wavelength and orbital angular momentum demultiplexing using tunable MEMS-based Fabry-Perot filter
Lyubopytov, V. S., Porfirev, A. P., Gurbatov, S. O., Paul, S., Schumann, M. F., Cesar, J., Malekizandi, M., Haidar, M. T., Wegener, M., Chipouline, A., Küppers, F.
Opt. Express 25, 2017, DOI: 10.1364/OE.25.009634

Cleaving Direct-Laser-Written Microstructures on Demand
Zieger, M. M., Mueller, P., Quick, A. S., Wegener, M., Barner-Kowollik, C.
Angew. Chem. Int. Ed., 2017 DOI: 10.1002/anie.201701593

Light activated non-reciprocal motion in liquid crystalline networks by designed microactuator architecture
Martella, D., Antonioli, D., Nocentini, S., Wiersma, D. S., Galli, G., Laus, M., Parmeggiani, C.
RSC Adv., 7, 2017, DOI: 10.1039/c7ra03224b

Selective Surface Smoothening of Polymer Microlenses by Depth Confined Softening
Chidambaram, N., Kirchner, R., Fallica, R., Yu, L., Altana, M., Schift, H.
Adv. Mater. Technol. 2017, DOI: 10.1002/admt.201700018

Experiments on the Parallel Hall Effect in Three-Dimensional Metamaterials
Kern, C., Schuster, V., Kadic, M., Wegener, M.
Phys. Rev. Applied, 2017, DOI: 10.1103/PhysRevApplied.7.044001

Deployable micro-traps to sequester motile bacteria
Di Giacomo, R., Krödel, S., Maresca, B., Benzoni, P., Rusconi, R., Stocker, R., Daraio, C.
Scientific Reports 7, 2017, DOI: 10.1038/srep45897

Photonic molecules with a tunable inter-cavity gap
Siegle, T., Schierle, S., Kraemmer, S., Richter, B., Wondimu, S. F., Schuch, P., Koos, C., Kalt, H.
Light: Science & Applications 6, 2017, DOI: 10.1038/lsa.2016.224

Spermatozoa as Functional Components of Robotic Microswimmers
Magdanz, V., Medina-Sánchez, M., Schwarz, L., Xu, H., Elgeti, J., Schmidt, O. G.
Adv. Mater. 2017, DOI: 10.1002/adma.201606301

Multicellular Biohybrid Materials: Probing the Interplay of Cells of Different Types Precisely Positioned and Constrained on 3D Wireframe-Like Microstructures
Gullo, M. R., Takeuchi, S., Paul, O.
Adv. Healthcare Mater. 2017, DOI: 10.1002/adhm.201601053

Muscle-actuated Biomimetic Hydrogel-Based 3D Microskeleton
Gullo, M. R., Takeuchi, S., Paul, O.
IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), 2017, DOI: 10.1109/MEMSYS.2017.7863350

Biocompatible 3D printed magnetic micro needles
Kavaldzhiev, M., Perez, J. E., Ivanov, Y., Bertoncini, A., Liberale, C., Kosel, J.
Biomed. Phys. Eng. Express 3, 2017, DOI: 10.1088/2057-1976/aa5ccb

Functionalized 3D Architected Materials via Thiol-Michael Addition and Two-Photon Lithography
Yee, D. W., Schulz, M. D., Grubbs, R. H., Greer, J. R.
Adv. Mater., 2017, DOI: 10.1002/adma.201605293

3D-printed eagle eye: Compound microlens system for foveated imaging
Thiele, S., Arzenbacher, K., Gissibl, T., Giessen, H., Herkommer, A. M.
Science Advances, 3, 2017, DOI: 10.1126/sciadv.1602655

Infrared dielectric response of Nanoscribe IP-dip and IP-L monomers after polymerization from 250 cm-1 to 6000 cm-1
Fullager, D. B., Boreman, G. D., Hofmann, T.
Opt. Mater. Express 7, 888-894 (2017), DOI: 10.1364/OME.7.000888

Multi-Component Microscaffold With 3D Spatially Defined Proteinaceous Environment
Serien, D., Takeuchi, S.
ACS Biomater. Sci. Eng., 2017, DOI: 10.1021/acsbiomaterials.6b00695

Guiding Cell Attachment in 3D Microscaffolds Selectively Functionalized with Two Distinct Adhesion Proteins
Richter, B., Hahn, V., Bertels, S., Claus, T. K., Wegener, M., Delaittre, G., Barner-Kowollik, C., Bastmeyer, M.
Adv. Mater. 2017, 29, DOI: 10.1002/adma.201604342

Vertical microgoblet resonator with high sensitivity fabricated by direct laser writing on a Si substrate
Gao, X., Li, J., Hao, Z., Bo, F., Hu, C., Wang, J., Liu, Z., Li, Z.-Y., Zhang, G., Xu, J.
J. Appl. Phys. 121, 064502, 2017, DOI: 10.1063/1.4975790

Photo-structurable polymer for interlayer single-mode waveguide fabrication by femtosecond laser writing
Nguyen, H. H. D., Hollenbach, U., Pfirrmann, S., Ostrzinski, U., Pfeiffer, K., Hengsbach, S., Mohr, J.
Optical Materials, Volume 66, 2017, DOI: 10.1016/j.optmat.2017.01.037

Micro-Structured Two-Component 3D Metamaterials with Negative Thermal-Expansion Coefficient from Positive Constituents
Qu, J., Kadic, M., Naber, A., Wegener, M.
Scientific Reports 7, 2017, DOI: 10.1038/srep40643

Fractal nematic colloids
Hashemi, S. M., Jagodič, U., Mozaffari, M. R., Ejtehadi, M. R., Muševič, I., Ravnik, M.
Nature Communications 8, 2017, DOI: 10.1038/ncomms14026

Comparison of three types of redox active polymer for two photon stereolithography
Folkertsma, L., Zhang, K., Hempenius, M. A., Vancso, G. J., van den Berg, A., Odijk, M.
Polym. Adv. Technol., 2017, DOI: 10.1002/pat.3998

Osteogenic cell functionality on 3-dimensional nano-scaffolds with varying stiffness
Maggi, A., Allen, J., Desai, T., Greer J. R.
Extreme Mechanics Letters, Vol. 13, 2017, DOI: 10.1016/j.eml.2017.01.002

Photochemically Driven Polymeric Network Formation: Synthesis and Applications
Blasco, E., Wegener, M., Barner-Kowollik, C.
Adv. Mater. 2017, DOI: 10.1002/adma.201604005

Integrating metallic wiring with three-dimensional polystyrene colloidal crystals using electron-beam lithography and three-dimensional laser lithography
Tian, Y., Isotalo, T. J., Konttinen, M. P., Li, J., Heiskanen, S., Geng, Z., Maasilta, I. J.
J. Phys. D: Appl. Phys. 50, 2017, DOI: 10.1088/1361-6463/aa5004

8-channel 448 Gbit/s Silicon Photonic Transmitter Enabled by Photonic Wire Bonding
Billah, M. R., Blaicher, M., Kemal, J. N., Hoose, T., Zwickel, H., Dietrich, P.-I., Troppenz, U., Möhrle, M., Merget, F., Hofmann, A., Witzens, J., Randel, S., Freude, W., Koos, C.
Optical Fiber Communication Conference 2017, DOI: 10.1364/OFC.2017.Th5D.6

Combining in-situ lithography with 3D printed solid immersion lenses for single quantum dot spectroscopy
Sartison, M., Portalupi, S. L., Gissibl, T., Jetter, M., Giessen, H., Michler, P.
Scientific Reports 7, 2017, DOI: 10.1038/srep39916

Robotically controlled microprey to resolve initial attack modes preceding phagocytosis
Schuerle, S., Vizcarra, I. A., Moeller, J., Sakar, M. S., Özkale, B., Machado Lindo, A., Mushtaq, F., Schoen, I., Pané, S., Vogel, V., Nelson, B. J.
Science Robotics, Vol. 2, Issue 2, 2017 DOI: 10.1126/scirobotics.aah6094


Fabrication of Micro Three Dimensional Structures by Two Photon Polymerization with SiO/Resin
Herrera Salazar, M., Akiyama, H., Nakayama, T., Suematsu, H., Niihara, K.
Advances in Science and Technology, DOI:

3D Lithography of Gelatin-Based Photo-Actuable Scaffolds
Pennacchio, F. A., Fedele, C., Cavalli, S., Vecchione, R., Netti, P. A.
2nd International Conference of Photoalignment and Photopatterning in Soft Materials, 2016

Conical Nanoantenna Arrays for Terahertz Light
Rovere, A., Toma, A., Prato, M., Bertoncini, A., Cerea, A., Piccoli, R., Perucchi, A., Di Pietro, P., De Angelis, F., Manna, L., Morandotti, R., Liberale, C., Razzari, L.
Photonics North (PN), 2016, DOI: 10.1109/PN.2016.7537936

Optomechanical force estimation using passive micromanipulator end-effectors
Power, M., Yang, G.
Manipulation, Automation and Robotics at Small Scales (MARSS), International Conference on, 2016,
DOI: 10.1109/MARSS.2016.7561745

Effectively Transparent Contacts (ETCs) for Solar Cells
Saive, R., Bukowsky, C. R., Yalamanchili, S., Boccard, M., Saenz, T., Borsuk, A. M., Holman, Z., Atwater, H. A.
Photovoltaic Specialists Conference (PVSC), 2016 IEEE 43rd, DOI: 10.1109/PVSC.2016.7750346

High-Quality Photonic Crystals with a Nearly Complete Band Gap Obtained by Direct Inversion of Woodpile Templates with Titanium Dioxide
Marichy, C., Muller, N., Froufe-Pérez, L. S., Scheffold, F.
Sci. Rep. 6, 21818, 2016, DOI: 10.1038/srep21818

Quantitative Comparison of Measurement Methods for the Evaluation of Micro- and Nanostructures Written with 2PP
Harnisch, E. M., König, N., Schmitt, R.
Proc. SPIE 9884, Nanophotonics VI, 98842Z, 2016, DOI: 10.1117/12.2227598

Precise 3D Printing of Micro/Nanostrucutres Using Highly Conductive Carbon Nanotube-Thiol-Acrylate Composites
Liu, Y., Xiong, W., Jiang, L. J., Zhou, Y. S., Lu, Y. F.
Proc. SPIE 9738, Laser 3D Manufacturing III, 973808, 2016, DOI: 10.1117/12.2214862

Photonic Nanofences for Integrated Sub-Wavelength Structures-Based Sensing Applications
Cadarso, V. J., Llobera, A., Puyol, M., Schift, H.
2016 IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS), 2016, DOI: 10.1109/MEMSYS.2016.7421778

Non-Spherical Liposome Formation Using 3D-Laser-Printed Micro-Cube Structures
Inoue, K., Kamiya, K., Osaki, T., Miki, N., Takeuchi, S.
2016 IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS), 2016, DOI: 10.1109/MEMSYS.2016.7421592

Muscle-Actuated Bio-Hybrid MEMS by Cell Culture and Differentiation of Metamaterial Micro-Scaffolds
Gullo, M. R., Takeuchi, S., Paul, O.
2016 IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS), 2016, DOI: 10.1109/MEMSYS.2016.7421729

Multi-Chip Integration by Photonic Wire Bonding: Connecting Surface and Edge Emitting Lasers to Silicon Chips
Hoose, T., Billah, M., Blaicher, M., Marin, P., Dietrich, P.-I., Hofmann, A., Troppenz, U., Moehrle, M., Lindenmann, N., Thiel, M., Simon, P., Hoffmann, J., Goedecke, M. L., Freude, W., Koos, C.
Optical Fiber Communication Conference, 2016, DOI: 10.1364/OFC.2016.M2I.7

Direct 3D nanoprinting on fiber tip of collimating lens and OAM mode converter in one compound element
Weiss, I., Marom, D. M.
Optical Fiber Communication Conference, OSA Technical Digest, 2016, DOI: 10.1364/OFC.2016.Th3E.2

Development of Biocompatible Magnetic Microrobot Transporter Using 3D Laser Lithography
Li, J., Ma, W., Niu, F., Cho Y. T., Chen, S., Ouyang, B., Ji, H., Yang, J., Sun, D.
2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2016, DOI: 10.1109/AIM.2016.7576856

Advances in design and testing of limited angle optical diffraction tomography system for biological applications
Kuś, A., Makowski, P., Kujawińska, M.
Proc. SPIE 9718, Quantitative Phase Imaging II, 971825, 2016, DOI: 10.1117/12.2211680

3D Light Robotics
Glückstad, J., Palima, D., Villangca, M., Banas, A.
Proc. SPIE 9738, Laser 3D Manufacturing III, 97380A, DOI: 10.1117/12.2217404

3D Chemical Patterning of Micromaterials for Encoded Funtionality
Ceylan, H., Yasa I. C., Sitti, M.
Adv. Mater. 2016, DOI: 10.1002/adma.201605072

Micromechanics of Amorphous Metal / Polymer Hybrid Structures with 3D Cellular Architectures: Size Effects, Buckling Behavior, and Energy Absorption Capability
Mieszala, M., Hasegawa, M., Guillonneau, G., Bauer, J., Raghavan, R., Frantz, C., Kraft, O., Mischler, S., Michler, J., Philippe, L.
Small 2016, DOI: 10.1002/smll.201602514

Femtosecond laser direct writing in transparent materials based on nonlinear absorption
Jiang, L. J., Maruo, S., Osellame, R., Xiong, W., Campbell, J. H., Lu, Y. F.
MRS Bulletin, 41(12), 2016, DOI: 10.1557/mrs.2016.272

Microlattice Metamaterials for Tailoring Ultrasonic Transmission with Elastoacoustic Hybridization
Krödel, S., Daraio, C.
Phys. Rev. Applied 6, 064005, 2016, DOI: 10.1103/PhysRevApplied.6.064005

Review on Fabrication and Manipulation of Scaffold and Ciliary Microrobots
Kim, S., Lee, S., Choi, H.
Hanyang Med Rev, 2016, DOI: 10.7599/hmr.2016.36.4.235

Automated aberration correction of arbitrary laser modes in high numerical aperture systems
Hering, J., Waller, E. H., von Freymann, G.
Opt. Express 24, 2016, DOI: 10.1364/OE.24.028500

Comparative analysis of direct laser writing and nanoimprint lithography for fabrication of optical phase elements
Lightman, S., Gvishi, R., Hurvitz, G., Arie, A.
Appl. Opt. 55, 2016, DOI: 10.1364/AO.55.009724

Hydrogel with Orthogonal Reactive Units: 2D and 3D Cross-Linking Modulation
Della Giustina, G., Giulitti, S., Brigo, L., Zanatta, M., Tromayer, M., Liska, R., Elvassore, N., Brusatin, G.
Macromol. Rapid Commun. 2016, DOI: 10.1002/marc.201600570

Mechanical properties tunability of three-dimensional polymeric structures in two-photon lithography
Lemma, E. D., Rizzi, F., Dattoma, T., Spagnolo, B., Sileo, L., Qualtieri, A., De Vittorio, M., Pisanello, F.
IEEE Transactions on Nanotechnology, Issue: 99, 2016, DOI: 10.1109/TNANO.2016.2625820

Direct Laser Writing Polymer Micro-Resonators for Refractive Index Sensors
Wei, H., Krishnaswamy, S.
IEEE Photonics Technology Letters, Volume: 28, Issue: 24, 2016, DOI: 10.1109/LPT.2016.2623814

Post-print UV curing method for improving the mechanical properties of prototypes derived from two-photon lithography
Oakdale, J. S., Ye, J., Smith, W. L., Biener, J.
Optics Express, Vol. 24, Issue 24, 2016, DOI: 10.1364/OE.24.027077

Toward Direct Laser Writing of Actively Tuneable 3D Photonic Crystals
Hu, Y., Miles, B. T., Ho, Y.-L. D., Taverne, M. P. C., Chen, L., Gersen, H., Rarity, J. G., Faul, C. F. J.
Adv. Optical Mater. 2016, DOI: 10.1002/adom.201600458

A Miniaturized Polymer Grating for Topological Order Detection of Cylindrical Vector Beams
Xie, Z., Lei, T., Weng, X., Du, L., Gao, S., Yuan, Y., Feng, S., Zhang, Y., Yuan, X.
IEEE Photonics Technology Letters, 2016, DOI: 10.1109/LPT.2016.2623326

Programmable assembly of heterogeneous microparts by an untethered mobile capillary microgripper
Giltinan, J., Diller, E., Sitti, M.
Lab Chip, 2016,16, 4445-4457, DOI: 10.1039/C6LC00981F

Integrative optofluidic microcavity with tubular channels and coupled waveguides via two-photon polymerization
Li, Y., Fang, Y., Wang, J., Wang, L., Tang, S., Jiang, C., Zheng, L., Mei, Y.
Lab Chip (2016), DOI: 10.1039/c6lc01148a

Structure, biomimetics, and fluid dynamics of fish skin surfaces
Lauder, G. V., Wainwright, D. K., Domel, A. G., Weaver, J. C., Wen, L., Bertoldi, K.
Phys. Rev. Fluids 1, 060502 (2016), DOI: 10.1103/PhysRevFluids.1.060502

Tarantula-Inspired Noniridescent Photonics with Long-Range Order
Hsiung, B.-K., Siddique, R. H., Jiang, L., Liu, Y., Lu, Y., Shawkey, M. D., Blackledge, T. A.
Adv. Optical Materials (2016), DOI: 10.1002/adom.201600599

Wavelength-scale light concentrator made by direct 3D laser writing of polymer metamaterials
Moughames, J., Jradi, S., Chan, T. M., Akil, S., Battie, Y., En Naciri, A., Herro, Z., Guenneau, S., Enoch, S., Joly, L., Cousin, J., Bruyant, A.
Scientific Reports 6 (2016), DOI: 10.1038/srep33627

Estimation of line dimensions in 3D direct laser writing lithography
Guney, M. G., Fedder, G. K.
J. Micromech. Microeng. 26, 2016, DOI: 10.1088/0960-1317/26/10/105011

Wetting Characteristics of 3-Dimensional Nanostructured Fractal Surfaces
Davis, E., Liu, Y., Jiang, L., Lu, Y., Ndao, S.
Applied Surface Science, 2016, DOI: 10.1016/j.apsusc.2016.09.102

Electrically responsive microreservoires for controllable delivery of dexamethasone in bone tissue engineering
Paun, I. A., Zamfirescu, M., Luculescu, C. R., Acasandrei, A. M., Mustaciosu, C. C., Mihailescu, M., Dinescu, M.
Applied Surface Sciences, 2016, DOI: 10.1016/j.apsusc.2016.09.027

Three-dimensional soft material micro-patterning via Direct Laser Lithography of flexible moulds
Bernardeschi, I., Tricinci, O., Mattoli, V., Filippeschi, C., Mazzolai, B., Beccai, L.
ACS Appl. Mater. Interfaces, 2016, DOI: 10.1021/acsami.6b08872

Spatio-Temporal Proximity Characteristics in 3D -Printing via Multi-Photon Absorption
Waller, E. H., von Freymann, G.
2016, 8(8), 297; DOI:10.3390/polym8080297

A Versatile Direct Laser Writing Lithography Technique for Surface Enhaced Infra-Red Spectroscopy Sensors
Braun, A., Maier, S. A.
ACS Sens., 2016, DOI: 10.1021/acssensors.6b00469

Tailored probes for atomic force microscopy fabricated by two-photon polymerization
Göring, G., Dietrich, P.-I., Blaicher, M., Sharma, S., Korvink, J. G., Schimmel, T., Koos, C., Hölscher, H.
Applied Physics Letters 109, 063101 (2016), DOI: 10.1063/1.4960386

In Situ Lithiation-Delithiation of Mechanically Robust Cu-Si Core-Shell Nanolattices in a Scanning Electron Microscope
Xia, X., Di Leo, C. V., Gu, W., Greer, J. R.
ACS Energy Lett., 2016, 1, pp 492–499, DOI: 10.1021/acsenergylett.6b00256

Fabrication and Manipulation of Ciliary Microrobots with Non-reciprocal Magnetic Actuation
Kim, S., Lee, S., Lee, J., Nelson, B. J., Zhang, L., Choi, H.
Scientific Reports
6, Article number: 30713 (2016), DOI: 10.1038/srep30713

Direct Writing Target Structures by Two-Photon Polymerization
Jiang, L. J., Campbell, J. H., Lu, Y. F., Bernat, T., Petta, N.
Fuscion Science and Technology, Vol. 70, 2, 2016, DOI: 10.13182/FST15-222

Wavelength-selective orbital-angular-momentum beam generation using MEMS tunable Fabry-Perot filter
Paul, S., Lyubopytov, V. S., Schumann, M. F., Cesar, J., Chipouline, A., Wegener, M., Küppers, F.
Optics Letters, Vol. 41, Issue 14, 2016, DOI: 10.1364/OL.41.003249

Photoresist Design for Elastomeric Light Tunable Photonic Devices
Nocentini, S., Martella, D., Parmeggiani, C., Wiersma, D. S.
Materials 2016, 9, 525, DOI:10.3390/ma9070525

Ultra-compact on-chip LED collimation optics by 3D femtosecond direct laser writing
Thiele, S., Gissibl, T., Giessen, H., Herkommer, A. M.
Optics Letters, Vol. 41, Issue 13, 2016, DOI: 10.1364/OL.41.003029

Two-photon direct laser writing of ultracompact multi-lens objectives
Gissibl, T., Thiele, S., Herkommer, A., Giessen, H.
Nature Photonics, 2016, DOI: 10.1038/nphoton.2016.121

Sub-micrometre accurate free-form optics by three-dimensional printing on single-mode fibres
Gissibl, T., Thiele, S., Herkommer, A., Giessen, H.
Nature Communications 7, 2016, DOI: 10.1038/ncomms11763

Effectively Transparent Front Contacts for Optoeletronics Devices
Saive, R., Borsuk, A. M., Emmer, H. S., Bukowsky, C. R., Lloyd, J. V., Yalamanchili S., Atwater H. A.
Advanced Optical Materials, 2016, DOI: 10.1002/adom.201600252

Performance comparison of acrylic and thiol-acrylic resins in two-photon polymerization
Jiang, L., Xiong, W., Zhou, Y., Liu, Y., Huang, X., Li, D., Baldacchini, T., Jiang L., Lu, Y.
Opt. Express 24, 13687-13701, 2016, DOI: 10.1364/OE.24.013687

Three-Dimensional Single Gyroid Photonic Crystals with a Mid-Infrared Bandgap
Peng, S., Zhang, R., Chen, V. H., Khabiboulline, E. T., Braun, P., Atwater, H. A.
ACS Photonics Article ASAP, DOI: 10.1021/acsphotonics.6b00293

Three-dimensional-printed gas dynamic virtual nozzles for x-ray laser sample delivery
Nelson, G., Kirian, R. A., Weierstall, U., Zatsepin, N. A., Faragó, T., Baumbach, T., Wilde, F., Niesler, F. B. P., Zimmer, B., Ishigami, I., Hikita, M., Bajt, S., Yeh, S.-R., Rousseau, D. L., Chapman, H. N., Spence, J. C. H., Heymann, M.
Opt. Express 24, 11515-11530, 2016, DOI: 10.1364/OE.24.011515

Diffractive Spectral-Splitting Optical Element Designed by Adjoint-Based Electromagnetic Optimization and Fabricated by Femtosecond 3D Direct Laser Writing
Xiao, T. P., Cifci, Bhargava, S., Chen, H., Gissibl, T., Zhou, W., Giessen, H., Toussaint, K. C. Jr., Yablonovitch, E., Braun, P. V.
ACS Photonics, 2016, DOI: 10.1021/acsphotonics.6b00066

Tailored Buckling Microlattices as Reusable Light-Weight Shock Absorbers
Frenzel, T., Findeisen, C., Kadic, M., Gumbsch, P., Wegener, M.
Adv. Mater. 2016, DOI: 10.1002/adma.201600610

Optimizing the mechanical properties of polymer resists for strong and light-weight micro-truss structures
Schroer, A., Bauer, J., Schwaiger, R., Kraft, O.
Extreme Mechanics Letters, 2016, DOI: 10.1016/j.eml.2016.04.014

Broadband circularly polarizing dichroism with high efficient plasmonic helical surfaces
Hu, J., Zhao, X., Li, R., Zhu, A., Chen, L., Lin, Y., Cao, B., Zhu, X., Wang, C.
Opt. Express 24, 11023-11032, 2016, DOI: 10.1364/OE.24.011023

Replicated micro structures based on two-photon lithography
Harnisch, E., Klein, J. J., Russew, M.-M., Crailsheim, H., Vogelsang, A., Schmitt, R.

Light-driven micro-tool equipped with a syringe function
Villangca, M. J., Palima, D., Bañas, A. R.,Glückstad, J.
Light: Science & Applications, Vol. 5, 2016, DOI: 10.1038/lsa.2016.148

Spatial beam intensity shaping using phase masks on single-mode optical fibers fabricated by femtosecond direct laser writing
Gissibl, T.,Schmid, M., Giessen, H.
Optica Vol. 3, Issue 4, 2016, DIO: 10.1364/OPTICA.3.000448

Two-photon nanolithography for patterning ionic liquid-polymer composites
Bakhtina, N., MacKinnon, N., Korvink, J.
SPIE Newsroom, 2016, DOI: 10.1117/2.1201603.006345

Formulating an Ideal Protein Photoresist for Fabricating Dynamic Microstructures with High Aspect Ratios and Uniform Responsiveness
Lay, C. L., Lee, Y. H., Lee, M. R., Phang, I. Y., Ling, X. Y.
ACS Appl. Mater. Interfaces, 2016, DOI: 10.1021/acsami.6b02306

Note: On-chip multifunctional fluorescent-magnetic Janus helical microswimmers
Hwang, G., Decanini, D., Leroy, L., Haghiri-Gosnet, A. M.
Rev. Sci. Instrum. 87, 036104, 2016, DOI: 10.1063/1.4943259

Freeform three-dimensional embedded polymer waveguides enabled by external-diffusion assisted two-photon lithography
Nguyen, H. H. D., Hollenbach, U., Ostrzinski, U., Pfeiffer, K., Hengsbach, S., Mohr, J.
Applied Optics Vol. 55, Issue 8, 2016, DOI: 10.1364/AO.55.001906

Simultaneous Dual Encoding of Three-Dimensional Structures by Light-Induced Modular Ligation
Claus, T. K., Richter, B., Hahn, V., Welle, A., Kayser, S., Wegener, M., Bastmeyer, M., Delaittre, G., Barner-Kowollik, C.
Angew. Chem. Int. Ed. (2016), DOI:10.1002/anie.201509937

Microfluidic-Based Droplet and Cell Manipulations Using Artificial Bacterial Flagella
Ding, Y., Qiu, F., Casadevall i Solvas, X., Chiu, F. W. Y., Nelson, B. J., deMello, A.
Micromachines, 7(2), (2016), DOI: 10.3390/mi7020025

Insensitivity to Flaws Leads to Damage Tolerance in Brittle Architected Meta-Materials
Montemayor, L. C., Wong, W. H., Zhang, Y.-W., Greer, J. R.
Scientific Reports 6 (2016), DOI: 10.1038/srep20570 

Dielectric singularity in hyperbolic metamaterials: the inversion point of coexisting anisotropies
Caligiuri, V., Dhama, R. Sreekanth, K. V., Strangi, G., De Luca, A.
Scientific Reports 6 (2016), DOI: 10.1038/srep20002

Approaching theoretical strength in glassy carbon nanolattices
Bauer, J., Schroer, A., Schwaiger, R., Kraft, O.
Nature Materials (2016), DOI: 10.1038/nmat4561 

Direct writing of Cu-based micro-temperature detectors using femtosecond laser reduction of CuO nanoparticles
Mizoshiri, M., Arakane, S., Sakurai, J., Hata, S.
Appl. Phys. Express 9, 2016, DOI: 10.7567/APEX.9.036701 

Laser-assisted fabrication and non-invasive imaging of 3D cell-seeding constructs for bone tissue engineering
Mihailescu, M., Paun, I. A., Zamfirescu, M., Luculescu, C. R., Acasandrei, A. M., Dinescu, M.
Journal of Materials Science, 2016, DOI: 10.1007/s10853-016-9723-z 

On-chip Microfluidic Multimodal Swimmer toward 3D Navigation
Barbot, A., Decanini, D., Hwang, G.
Scientific Reports 6, (2016), DOI: 10.1038/srep19041

Optical coherence tomography system mass-producible on a silicon photonic chip
Schneider, S., Lauermann, M., Dietrich, P.-I., Weimann, C., Freude, W., Koos, C.
Opt. Expess 24, 2016, DOI: 10.1364/OE.24.001573

Cellular Cargo Delivery: Toward Assisted Fertilization by Sperm-Carrying Micromotors
Medina-Sánchez, M., Schwarz, L., Meyer, A. K., Hebenstreit, F., Schmidt, O. G.
Nano Lett., 201616 (1), DOI: 10.1021/acs.nanolett.5b04221

Laser-Directed Assembly of Aligned Carbon Nanotubes in Three Dimensions for Multifunctional Device Fabrication
Xiong, W., Liu, Y., Jiang, L. J., Zhou, Y. S., Li, D. W., Jiang, L., Silvain, J.-F., Lu, Y. F. 
Adv Mater., 2016, DOI: 10.1002/adma.201505516

2016 IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS), Shanghai, 2016, pp. 909-912.
doi: 10.1109/MEMSYS.2016.7421778


Wireless Obstacle Detection and Characterization by Multimodal Helical Nanoswimmers
Barbot, A., Decanini, D., Hwang, G.
IEEE International Conference on Robotics and Automation (ICRA), 2015, DOI: 10.1109/ICRA.2015.7139687

Ultrafine Three-Dimensional (3D) Laser Lithographic Fabrication of Microneedle and Its Application to Painless Insertion and Blood Sampling Inspired by Mosquito
Suzuki, M., Sawa, T., Takahashi, T., Aoyagi, S.
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2015, DOI: 10.1109/IROS.2015.7353754

Superparamagnetic Hydrogels for Two-Photon-Polymerization and Their Application for the Fabrication of Swimming Microrobots
Peters, C., Costanza, V., Pané, S., Nelson, B. J., Hierold, C.
Transducers - 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 2015, DOI: 10.1109/TRANSDUCERS.2015.7181035

Stackable Octahedron-Based Photoresist Scaffold by Direct Laser Writing for Controlled Three-Dimensional Cell Networks
Larramendy, F., Yoshida, S., Fekete, Z., Serien, D., Takeuchi, S., Paul, O.
Transducers - 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 2015, DOI: 10.1109/TRANSDUCERS.2015.7181005

Scaffold-Type Microrobots for Targeted Cell Delivery
Kim, S., Ha, S., Lee, S., Qiu, F., Choi, H., Yu, S., Nelson, B. J.
12th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI), 2015, DOI: 10.1109/URAI.2015.7358821

Multi-Flagella Helical Microswimmers for Multiscale Cargo Transport and Reversible Targeted Binding
Beyrand, N., Couraud, L., Barbot, A., Decanini, D., Hwang, G.
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2015, DOI: 10.1109/IROS.2015.7353551

Fabrication of Microneedles Precisely Imitating Mosquito's Proboscis by Nanoscale Three Dimensional Laser Lithography and its Characterization
Suzuki, M., Sawa, T., Terada, Y., Takahashi, T., Aoyagi, S.
Transducers - 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 2015, DOI: 10.1109/TRANSDUCERS.2015.7180876

Direct Laser Written Passive Micromanipulator End-Effector for Compliant Object Manipulation
Power, M., Yang, G.-Z.
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2015, DOI: 10.1109/IROS.2015.7353462

Cell type-specific adaptation of cellular and nuclear volume in micro-engineered 3D environments
Greiner, A. M., Klein, F., Gudzenko, T., Richter, B., Striebel, T., Wundari, B. G., Autenrieth, T. J., Wegener, M., Franz, C. M., Bastmeyer, M.
Biomaterials, Vol. 69, 2015, DOI: 10.1016/j.biomaterials.2015.08.016

Resilient 3D hierarchical architected metmaterials
Meza, L. R., Zelhofer, A., Clarke, N., Mateos, A. J., Kochmann, D. M., Greer, J. R.
Proceedings of the National Academy of Sciences of the United States of America, 2015 DOI: 10.1073/pnas.1509120112

Art on the Nanoscale and Beyond
Yetisen, A. K., Coskun, A. F., England, G., Cho, S., Butt, H., Hurwitz, J., Kolle, M., Khademhosseini, A., Hart, A. J., Folch, A., Yun, S. H.
Adv. Mater., 2015, DOI:10.1002/adma.201502382

Designing π-Conjugated Polymeric Nano- and Microstructures via Light Induced Chemistry
Blasco, E., Yameen, B., Quick, A. S., Krolla-Sidenstein, P., Welle, A., Wegener, M., Barner-Kowollik, C.
Macromolecules (2015) DOI: 10.1021/acs.macromol.5b02024 

Integrated Photonic Nanofences: Combining Subwavelength Waveguides with an Enhanced Evanescent Field for Sensing Applications
Cardaso, V. J., Llobera, A., Puyol, M., Schift, H.
ACS Nano, Article ASAP DOI: 10.1021/acsnano.5b05864

Degradable Magnetic Composites for Minimally Invasive Interventions: Device Fabrication, Targeted Drug Delivery, and Cytotoxicity Tests
Peters, C., Hoop, M., Pané, S., Nelson, B. J., Hierold, C.
Adv. Mater. 2015, DOI: 10.1002/adma.201503112

3D Micropatterned Surface Inspired by Salvinia molesta via Direct Laser Lithography
Tricinci, O., Terencio, T., Mazzolai, B., Pugno, N. M., Greco, F., Mattoli, V.
ACS Appl. Mater. Interfaces, 20157 (46), DOI: 10.1021/acsami.5b07722

Two-Photon Lithography of 3D Nanocomposite Piezoeletric Scaffolds for Cell Stimulation
Marino, A., Barsotti, J., de Vito, G., Filippeschi, C., Mazzolai, B., Piazza, V., Labardi, M., Mattoli, V., Ciofani, G.
ACS Appl. Mater. Interfaces, 2015, DOI: 10.1021/acsami.5b08764

Cloaking of Contact Fingers on Solar Cells Enabled by Transformation Optics
Schumann, M. F., Abass, A., Wiesendanger, S., Rockstuhl, C., Wegener, M.
Light, Energy and the Environement 2015, OSA Technical Digest (online) (Optical Society of America, 2015), DOI: 10.1364/PV.2015.PTu2B.3

Large-area fabrication of TiN nanoantenna arrays for refractory plasmonics in the mid-infrared by femtosecond direct laser writing and interference lithography
Bagheri, S., Zgrabik, C. M., Gissibl, T., Tittl, A., Sterl, F., Walter, R., De Zuani, S., Berrier, A., Stauden, T., Richter, G., Hu, E. L., Giessen, H.
Opt. Mater. Express 5, 2625-2633 (2015), DOI: 10.1364/OME.5.002625

Two-Color Single Hybrid Plasmonic Nanoemitters with Real Time Switchable Dominant Emission Wavelength
Zhou, X., Wenger, J., Viscomi, F. N., Le Cunff, L., Béal, J., Kochtcheev S., Yang, X., Wiederrecht, G. P., Colas des Francs, G., Bisht, A. S., Jradi, S., Caputo, R., Demir, H. V., Schaller, R. D., Plain, J., Vial, A., Sun, X. W., Bachelot, R.
Nano Letters, 2015 DOI: 10.1021/acs.nanolett.5b02962

3D Printed Microtransporters: Compound Micromachines for Spatiotemporally Controlled Delivery of Therapeutic Agents
Huang, T.-Y., Sakar, M. S., Mao, A., Petruska, A. J., Qiu, F., Chen, X.-B., Kennedy, S., Mooney, D., Nelson B. J. 
Adv. Mater., 2015, DOI: 10.1002/adma.201503095

Magnetically Driven Bi2O3/BiOCl-Based Hybrid Microrobots for Photocatalytic Water Remediation
Mushtaq, F., Guerrero, M., Sakar, M.S., Hoop, M., Lindo, A., Sort, J., Chen, X.-Z., Nelson, Br., Pellicer, E., Pané, S.
J. Mater. Chem. A., 2015, DOI: 10.1039/C5TA05825B

Three-Dimensional μ-Printing: An Enabling Technology
Hohmann, J. K., Renner, M., Waller, E. H., von Freymann, G.
Advanced Optical Materials (2015), DOI: 10.1002/adom.201500328

Shaping of light beams by 3D direct laser writing on facets of nonlinear crystals
Lightman, S., Gvishi, R., Hurvitz, G., Arie, A.
Opt. Lett. 40, 2015, DOI: 10.1364/OL.40.004460  

Transformative Two-Dimensional Array Configurations by Geometrical Shape-Shifting Protein Microstructures
Lay, C. L., Lee, M. R., Lee, H. K., Phang, I. Y., Ling, X. Y.
ACS Nano, 2015, DOI: 10.1021/acsnano.5b04300 

Experimental Investigation of Optimal Adhesion of Mushroom-Like Elastomer Microfibrillar Adhesives
Mavi, H., Song, S., Sitti, M.
Langmuir, 2015, DOI: 10.1021/acs.langmuir.5b02415

A miniaturized optical fiber microphone with concentric nanorings grating and microsprings structured diaphragm
Wang, H., Xie, Z., Zhang, M., Cui, H., He, J., Feng, S., Wang, X., Sun, W., Ye, J., Han, P., Zhang, Y.
Optics and Laser Technology, 2015, DOI: 10.1016/j.optlastec.2015.08.009

Fabrication of subwavelength-structured hollow waveguide array by two-photon polymerization
Belle, S., Edelmann, A., Hellmann, R., Jahns, J.
DGaO Proceedings 2015

Spatial correlations and optical properties in three-dimensional deterministic aperiodic structures
Renner, M., von Freymann, G
Scientific Reports 5, 2015, DOI: 10.1038/srep13129

Direct laser writing of pyramidal plasmonic structures with apertures and asymmetric gratings towards efficient subwavelength light focusing
Mu, J., Liu, Z., Li, J., Hao, T., Wang, Y., Sun, S., Li, Z., Li, W., Gu, C.
Opt. Express 23, 2015, DOI: 10.1364/OE.23.022564

Generalized phase contrast-enhanced diffractive coupling to light-driven micro-tools
Villangca, M., Bañas, A., Palima, D., Glückstad, J.
Opt. Eng. 54(11), 2015, DOI: 10.1117/1.OE.54.11.111308

Deterministic control of mean alignment and elongation of neuron-like cells by grating geometry: a computational approach
Sergi, P. N., Marino, A., Ciofani, G.
Integr. Biol., 2015, Advance Article, DOI: 10.1039/C5IB00045A

Fabrication of submicron proteinaceous structures by direct laser writing
Serien, D. and Takeuchi, S.
Applied Physics Letters 107, 013702 (2015); DOI: 10.1063/1.4926659

Polarization-independent actively tunable colour generation on imprinted plasmonic surfaces
Franklin, D., Chen, Y., Vazquez-Guardado, A., Modak, S., Boroumand, J., Xu, D., Wu, S.-T., and Chanda, D.
Nature Communications 6,7337,DOI:10.1038/ncomms8337

Observing Light Dynamics in Micro-sized Schwarzschild Metric
Bekenstein, R., Kabessa, Y., Tal, O., Bandres, M., Agranat, A. J., and Segev, M.
CLEO: 2015, OSA Technical Digest (online) (Optical Society of America, 2015), DOI: 10.1364/CLEO_QELS.2015.FTu4C.2 

Cloaking of Metal Contacts on Solar Cells
Schumann, M. F., Wiesendanger, S., Goldschmidt, J., Bittkau, K., Paetzold, U. W., Sprafke, A., Wehrspohn, R. B., Rockstuhl, C., and Wegener, M.
CLEO: 2015, OSA Technical Digest (online) (Optical Society of America, 2015), DOI: 10.1364/CLEO_SI.2015.SW1I.6

Light-Fueled Microscopic Walkers
Zeng, H., Wasylczyk, P., Parmeggiani, C., Martella, D., Burresi, M. and Wiersma, D. S.
Adv. Mater. (2015). DOI: 10.1002/adma.201501446

Three-dimensional cage-like microscaffolds for cell invasion studies
Spagnolo, B., Brunetti, V., Leménager, G., De Luca, E., Sileo, L., Pellegrino, T., Pompa, P.P., De Vittorio, M., Pisanello F.
Scientific Reports 5, DOI: 10.1038/srep10531 

Rapid Thiol-Yne-Mediated Fabrication and Dual Postfunctionalization of Micro-Resolved 3D Mesostructures
Quick, A. S., de los Santos Pereira, A., Bruns, M., Bückmann, T., Rodriguez-Emmenegger, C., Wegener, M. and Barner-Kowollik, C.
Adv. Funct. Mater., 2015, DOI: 10.1002/adfm.201500683

Fabrication of cm2 plasmonic nanoantenna arrays by femtosecond direct laser writing lithography: Effects of collective excitations on SEIRA enhancement
Bagheri, S., Weber, K., Gissibl, T., Weiss, T., Neubrech, F., Giessen, H.
ACS Photonics, 2015, DOI: 10.1021/acsphotonics.5b00141

Demonstration of a 3D Radar-Like SERS Sensor Micro- and Nanofabricated on an Optical Fiber
Xie, Z., Feng, S., Wang, P., Zhang, L., Ren, X., Cui, L., Zhai, T., Chen, J., Wang, Y., Wang, X., Sun, W., Ye, J., Han, P., Klar, P. J. and Zhang, Y.
Advanced Optical Materials. DOI: 10.1002/adom.201500041 

Direct patterning of Cu microstructures using femtosecond laser-induced CuO nanoparticle reduction
Arakane, S., Mizoshiri, M., and Hata, S.
Japanese Journal of Applied Physics 54, 06FP07, 2015, DOI: 10.7567/JJAP.54.06FP07 

In-chip direct laser writing of a centimeter-scale acoustic micromixer
van ‘t Oever J., Spannenburg N., Offerhaus H., van den Ende D., Herek J., Mugele F.
J. Micro/Nanolith. MEMS MOEMS. 14(2), 023503, 2015, DOI: 10.1117/1.JMM.14.2.023503

Mechanical Response of Hollow Metallic Nanolattices: Combining Structural and Material Size Effects
Montemayor L. C., Greer J. R.
J. Appl. Mech., 2015, DOI: 10.1115/1.4030361

Biomimicry at the nanoscale: current research and perspectives of two-photon polymerization
A. Marino, C. Filippeschi, V. Mattoli, B. Mazzolai, G. Ciofani
Nanoscale, 2015, 7, 2841-2850, DOI: 10.1039/C4NR06500J 

Mechanical metamaterials with anisotropic and negative effective mass-density tensor made from one constituent material
T. Bückmann, M. Kadic, R. Schittny, M. Wegener
Phys. Status Solidi B., DOI: 10.1002/pssb.201451698

Three-dimensional micro-printing of temperature sensors based on up-conversion luminescence
A. Wickberg, J. B. Mueller, Y. J. Mange, J. Fischer, T. Nann, M. Wegener
Appl. Phys. Lett. 106, 133103 (2015), DOI: 10.1063/1.4916222

Push-to-pull tensile testing of ultra-strong nanoscale ceramic-polymer composites made by additive manufacturing
J. Bauer, A. Schroer, R. Schwaiger, I. Tesari, C. Lange, L. Valdevit, O. Kraft
Extreme Mechanics Letters (2015), DOI: 10.1016/j.eml.2015.03.006

Towards integration of a liquid-filled fiber capillary for supercontinuum generation in the 1.2–2.4 μm range
S. Kedenburg, T. Gissibl, T. Steinle, A. Steinmann, and H. Giessen
Optics Express, Vol. 23, Issue 7, pp. 8281-8289 (2015), DOI: 10.1364/OE.23.008281 

Fabricating microscopic tools: towards optically actuated micro-robotics
D. B. Phillips, M. J. Padgett, J. G. Rarity, M. J. Miles, S. H. Simpson
Proc. SPIE 9374, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics VIII, 937402 (2015), DOI: 10.1117/12.2084812  

Alignment engineering in liquid crystalline elastomers: Free-form microstructures with multiple functionalities
H. Zeng, P. Wasylczyk, G. Cerretti, D. Martella, C. Parmeggiani, D. S. Wiersma
Applied Physics Letters 106, 111902 (2015), DOI: 10.1063/1.4915268

Element-Specific X-Ray Phase Tomography of 3D Structures at the Nanoscale
C. Donnelly, M. Guizar-Sicairos, V. Scagnoli, M. Holler, T. Huthwelker, A. Menzel, I. Vartiainen, E. Müller, E. Kirk, S. Gliga, J. Raabe, and L. J. Heyderman
Physical Review Letters 144, 115501 (2015), DOI: 10.1103/PhysRevLett.114.115501

Control the polarization state of light with symmetry-broken metallic metastructures
X. Xiong, S.-C. Jiang, Y.-S. Hu, Y.-H. Hu, Z.-H. Wang, R.-W. Peng, and M. Wang
Annals of Physics (2015), DOI: 10.1016/j.aop.2015.03.008

Rapid fabrication of graphene on dielectric substrates via solid-phase processes
W. Xiong, Y. Zhou, W. J. Hou, and Y. F. Lu
Proc. SPIE 9352, Synthesis and Photonics of Nanoscale Materials XII, 93520N (2015), DOI: 10.1117/12.2080691  

Fabricating tools for optically actuated microrobotics
D. Phillips
SPIE Newsroom (2015), DOI: 10.1117/2.1201502.005798 

Chemically responsive protein-photoresist hybrid actuator
D. Serien and S. Takeuchi
Micro Electro Mechanical Systems (MEMS), 2015 28th IEEE International Conference, DOI: 10.1109/MEMSYS.2015.7050993

Real-time automated characterization of 3D morphology and mechanics of developing plant cells
D. Felekis
, H. Vogler, G. Mecja, S. Muntwyler, A. Nestorova, T. Huang, M.S. Sakar, U. Grossniklaus, and B.J. Nelson
The International Journal of Robotics Research 0278364914564231 (2015), DOI: 10.1177/0278364914564231

Imaging nanowire plasmon modes with two-photon polymerization
C. Gruber, A. Hirzer, V. Schmidt, A. Trügler, U. Hohenester, H. Ditlbacher, A. Hohenau, and J.R. Krenn
Applied Physics Letters, 106 (2015), DOI: 10.1063/1.4913470

Ultra-strong architected Cu meso-lattices
X. Wendy Gu and J.R. Greer
Extreme Mechanics Letters, 0, 2352 (2015), DOI: 10.1016/j.eml.2015.01.006

Confinement dependent chemotaxis in two-photon polymerized linear migration constructs with highly definable concentration gradients
G.M. Hjorto, M.H. Olsen, I.M. Svane, and N.B. Larsen
Biomedical Microdevices, 17, 1387 (2015), DOI: 10.1007/s10544-015-9937-x

Highly asymmetric near infrared light transmission in an all-dielectric grating-on-mirror photonic structure
L. Zinkiewicz, J. Haberko and Piotr Wasylczyk
Opt. Express 23, 4206, DOI: 10.1364/OE.23.004206

Two-Photon Nanolithography Enhances the Performance of an Ionic Liquid–Polymer Composite Sensor
N.A. Bakhtina, U. Loeffelmann, N. MacKinnon, and J.G. Korvink
Adv. Funct. Mater., 1616 (2015), DOI:101002/adfm.201404370

Optically controlled elastic microcavities
A.M. Flatae, M. Burresi, H. Zeng, S. Nocentini, S. Wiegele, C. Parmeggiani, H. Kalt, and D. Wiersma
Light: Science & Applications accepted article preview 5 February 2015, DOI:10.1038/lsa.2015.55

Magnetic Helical Microswimmers Functionalized with Lipoplexes for Targeted Gene Delivery
F. Qiu, S. Fujita, R. Mhanna, L. Zhang, B.R. Simona, B.J. Nelson
Advanced Functional Materials, Volume 25, Issue 5, 2015, DOI: 10.1002/adfm.201403891

Optimization of hybrid polymer materials for 2PP and fabrication of individually designed hybrid microoptical elements thereof
E. Harnisch, Maria Russew, J. Klein, N. König, H. Crailsheim, and R. Schmitt
Optical Materials Express, 5, Issue 2, 456 (2015)

Subcellular stretch-induced cytoskeletal response of single fibroblasts within 3D designer scaffolds
A.C. Scheiwe, S.C. Frank, T.J. Autenrieth, M. Bastmeyer, M. Wegener
Biomaterials, Volume 44 (2015), DOI:10.1016/j.biomaterials.2014.12.018

Controllable light diffraction in woodpile photonic crystals filled with liquid crystal
C.-H. Ho, Y.-C. Cheng, L. Maigyte, H. Zeng, J. Trull, C. Cojocaru, D.S. Wiersma, K. Staliunas
Applied Physics Letters 106
, 021113 (2015); DOI: 10.1063/1.4905695

H.H. Gatzen, V. Saile, J. Leuthold
Micro and Nano Fabrication 2015, DOI: 10.1007/978-3-662-44395-8_6


Two-photon lithography of 3D micro cages for cell invasiveness assessment
Spagnolo, B., Brunetti, V., Lemenager, G., DeLuca, E., Pellegrino, T., Sileo, L., Pompa, P. P., De Vittorio, M., Pisanello, F.
Conference on Micro and Nano Engineering, 2014

On the fabrication and mechanism of pinecone surface structures
Jiang, G., Li, W., Mu, J., Sun, W., Gu, C.
Microelectron. Eng., 2014, DOI: 10.1016/j.mee.2014.07.013

On three-dimensional dilational elastic metamaterials
T. Bückmann, R. Schittny, M. Thiel, M. Kadic, G.W. Milton, and M. Wegener
New J. Phys., 2014, DOI: 10.1088/1367-2630/16/3/033032

Multifunctional polymer scaffolds with adjustable pore size and chemoattractant gradients for studying cell matrix invasion
Greiner, A. M., Jäckel, M., Scheiwe, A. C., Stamow, D. R., Autenrieth, T. J., Lahann, J. Franz, C. M., Bastmeyer, M.
Biomaterials, Vol. 35, Issue 2, 2014, DOI: 10.1016/j.biomaterials.2013.09.095

3D direct laser writing using a 405 nm diode laser
Mueller, P., Thiel, M., Wegener, M.
Opt. Lett. 39, 6847-6850, 2014, DOI: 10.1364/OL.39.006847

Three-Dimensional On-Board Optical Interconnects Enabled by Femtosecond Direct Laser Writing in Polymer
Nguyen, D. H. H., Hengsbach, S., Kaleta, K., Ostrzinski, U., Pfeiffer, K., Hollenbach, U., Mohr, J.
DGaO Proceedings 2014, urn:nbn:de:0287-2014-B014-5

Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
Meza, L. R., Das, S., Greer, J. R.
Science (2014), Vol. 345, Issue 6202, pp. 1322-1326, DOI: 10.1126/science.1255908

Catalytic driven micro-nanorobots fabricated by direct laser writing
A.A. Bakar, M. Nakajima, M. Takeuchi, T. Fukuda
Micro-NanoMechatronics and Human Science (MHS), 2014 International Symposium on,  10-12 Nov. 2014, DOI: 10.1109/MHS.2014.7006117

Two-Photon Polymerization Lithography and Laser Doppler Vibrometry of a SU-8-Based Suspended Microchannel Resonator
C. Accoto, A. Qualtieri, F. Pisanello, C. Ricciardi, C.F. Pirri, M. De Vittorio, and F. Rizzi
Journal of Microelectromechanical Systems, 99, 1, DOI: 10.1109/JMEMS.2014.2376986

Metallic stereostructured layer: An approach for broadband polarization state manipulation
X. Xiong, Y.-S. Hu, S.-C. Jiang, Y.-H. Hu, R.-H. Fan, G.-B. Ma, D.-J. Shu, R.-W. Peng, and M. Wang
Applied Physics Letters 105, 20 (2014) DOI: 10.1063/1.4902405

Assembly and mechanical characterizations of polymer microhelical devices
S. Alvo, D. Decanini, L. Couraud, A.-M. Haghiri-Gosnet, and G. Hwang
Intelligent Robots and Systems 2014 IEEE/RSJ International Conference, pp. 4656 DOI: 10.1109/IROS.2014.6943223

Controllable Roll-to-Swim motion transition of helical nanoswimmers
A. Barbot, D. Decanini and G. Hwang
Intelligent Robots and Systems 2014 IEEE/RSJ International Conference, pp. 4662 DOI:10.1109/IROS.2014.6943224

Photolithographic patterning of cellulose: a versatile dual-tone photoresist for advanced applications
A. Wolfberger, A. Petritz, A. Fian, J. Herka, V. Schmidt, B. Stadlober, R. Kargl, S. Spirk, and T. Griesser
Cellulose (2014) DOI: 10.1007/s10570-014-0471-4

Beam focalization in reflection from flat dielectric subwavelength gratings
Y. Cheng, H. Zeng, J. Trull, C. Cojocaru, M. Malinauskas, T. Jukna, D. Wiersma, and K. Staliunas
Opt. Lett. 39, 6086-6089 (2014)

Nanostructured Brownian Surfaces Prepared through Two-Photon Polymerization: Investigation of Stem Cell Response
A. Marino, A. Desii, M. Pellegrino, M. Pellegrini, C. Filippeschi, B. Mazzolai, M. Barbara, V. Mattoli, and G. Ciofani
ACS Nano (2014) DOI: 10.1021/nn5052426

Shape-Shifting 3D Protein Microstructures with Programmable Directionality via Quantitative Nanoscale Stiffness Modulation
M.R. Lee, I.Y. Phang, Y. Cui, Y.H. Lee, and X.Y. Ling
Small, 1613 (2014) DOI:10.1002/smll.201401343

Generating mobile fluidic traps for selective three-dimensional transport of microobjects
T.-Y. Huang, F. Qiu, H.-W. Tung, X.-B. Chen, B.J. Nelson, and M.S. Sakar
Applied Physics Letters 105
, (2014) DOI:10.1063/1.4895937

Ultrahigh Q-factor and figure of merit Fano metamaterial based on dark ring magnetic mode
B. Wang, Z. Xie, S. Feng, B. Zhang, and Y. Zhang
Optics Communications (2014) DOI: 10.1016/j.optcom.2014.08.062 

Influence of Direct Laser Written 3D Topographies on Proliferation and Differentiation of Osteoblast-Like Cells: Towards Improved Implant Surfaces
J.K. Hohmann and G. von Freymann
Advanced Functional Materials, 1616-3028 (2014)

Polymerization Kinetics in Three-Dimensional Direct Laser Writing
J.B. Mueller, J. Fischer, F. Mayer, M. Kadic, and M. Wegener
Advanced Materials, 1521-4095 (2014)

Transverse Mode Localization in Three-Dimensional Deterministic Aperiodic Structures
M. Renner and G. von Freymann
Advanced Optical Materials 2, 226 (2014)

Dynamic diffraction-limited light-coupling of 3D-maneuvered wave-guided optical waveguides
M. Villangca, A. Bañas, D. Palima, and J. Glückstad
Optics Express, 22, 15 (2014)

Direct laser writing of auxetic structures: present capabilities and challenges
S. Hengsbach and A.D. Lantada
Smart Materials and Structures, 23, 8 (2014)

Direct Laser Writing of Fractal Surfaces: Strategy to Design and Manufacture Textured Materials
S. Hengsbach and A.D. Lantada
Advanced Engineering Materials, 1527-2648 (2014)

An elasto-mechanical unfeelability cloak made of pentamode metamaterials
T. Bückmann
, M. Thiel, M. Kadic, R. Schittny & M. Wegener
Nature Communications 5, Article number: 4130

The Osteoprint: a Bio-Inspired Two-Photon Polymerized 3D Structure for the Enhancement of Bone-Like Cell Differentiation
A.Marino, C. Filippeschi, G.G. Genchi, V. Mattoli, B. Mazzolai, and G. Ciofani
Acta Biomaterialia 2014, DOI: 10.1016/j.actbio.2014.05.032

Hybrid 2D–3D optical devices for integrated optics by direct laser writing
M. Schumann, T. Bückmann, N. Gruhler, M. Wegener, and W. Pernice
Light: Science & Applications (2014) 3, DOI:10.1038/lsa.2014.56

Cooperative Manipulation and Transport of Microobjects Using Multiple Helical Microcarriers
T. Huang, F. Qiu, H.-W. Tung, K.E. Peyer, N. Shamsudhin, J. Pokki, L. Zhang, X.-b. Chen, B. Nelson, and M.S. Sakar
RSC Adv. 2014, DOI:10.1039/C4RA02260B

Superparamagnetic Twist-type Actuators with Shape-Independent Magnetic Properties and Surface Functionalization for Advanced Biomedical Applications
C. Peters, O. Ergeneman, P.D.W. García, M. Müller, S. Pané, B.J. Nelson, and Christofer Hierold
Adv. Funct. Mater., 1616 (2014), DOI:10.1002/adfm.201400596

Microstructured gradient-index antireflective coating fabricated on a fiber tip with direct laser writing
M. Kowalczyk, J.Haberko, and P. Wasylczyk 
Optics Express, 22, 12545 (2014)

Direct writing of graphene patterns on insulating substrates under ambient conditions
W. Xiong, Y.S. Zhou, W.J. Hou, L.J. Jiang, Y. Gao,  L.S. Fan, L. Jiang, J.F. Silvain, and Y.F. Lu
Scientific Report 4, 2014, DOI:10.1038/srep04892

StyletChip: a microfluidic device for recording host invasion behaviour and feeding of plant parasitic nematodes
C. Hu, J. Kearn, P. Urwin, C. Lilley, V. O'Connor, L. Holden-Dye, and H. Morgan
Lab Chip (2014); DOI:10.1039/C4LC00292J

Three-dimensional buried polymer waveguides via femtosecond direct laser writing with two-photon absorption
D.H.H Nguyen, K. Kaleta, S. Hengsbach, U. Ostrzinski, K. Pfeiffer, et al.
Micro-Optics 2014, DOI:10.1117/12.2051326

Three dimensional fabrication of optical waveguiding elements for on-chip integration
V.V. Parsi Sreenivas, M. Bülters, M. Schröder, and R.B. Bergmann
Micro-Optics 2014; DOI:10.1117/12.2052452

Two-Photon Polymerization: Investigation of Chemical and Mechanical Properties of Resins Using Raman Microspectroscopy
L.  Jiang, Y. Zhou, W. Xiong, Y. Gao, X. Huang, L. Jiang, T. Baldacchini,  J.-F. Silvain, and Y. Lu
Optics Letters, Doc. ID 207930 (2014)

Rapid prototyping of multi-scale biomedical microdevices by combining additive manufacturing technologies
S. Hengsbach, A.D. Lantada
Biomed Microdevices, DOI 10.1007/s10544-014-9864-2

Shape-induced force fields in optical trapping
D. Phillips, M. Padgett, S. Hanna, Y. Ho, D. Carberry, M. Miles, and S. Simpson
Nature Photonics, DOI:10.1038/nphoton.2014.74 (2014)

Direct laser writing of symmetry-broken nanocorrals and their applications in SERS spectroscopy
J. Mu, J. Li, W. Li, S. Sun, W. Sun, C. Gu
Applied Physics B, DOI 10.1007/s00340-014-5810-5 (2014)

Direct laser writing of symmetry-broken spiral tapers for polarization-insensitive three-dimensional plasmonic focusing
J. Li, J. Mu, B. Wang, W. Ding, J. Liu, H. Guo, W. Li, C. Gu, and Z. Li
Laser Photonics Review 1–8 (2014) / DOI 10.1002/lpor.201300206

Encoding molecular information in plasmonic nanostructures for anti-counterfeiting applications
Y. Cui, R.S. Hegde, I. Phang, H. Leeac, and X. Ling
Nanoscale 6, 282 (2014)

Hierarchical 3D SERS Substrates Fabricated by Integrating Photolithographic Microstructures and Self-Assembly of Silver Nanoparticles
Q. Zhang , Y. Lee , I. Phang , C. Lee , and X. Ling
Small, DOI: 10.1002/smll.201303773 (2014)

Silicon Hyperuniform Disordered Photonic Materials with a Pronounced Gap in the Shortwave Infrared
N. Muller, J. Haberko, C. Marichy, and F. Scheffold
Advanced Optical Materials 2, 115–119 (2014)

High-strength cellular ceramic composites with 3D microarchitecture
J. Bauer, S. Hengsbach, I. Tesari, R. Schwaiger, and O. Kraft
PNAS (2014), DOI: 10.1073/pnas.1315147111

High-Resolution 3D Direct Laser Writing for Liquid-Crystalline Elastomer Microstructures
H. Zeng, D. Martella, P. Wasylczyk, G. Cerretti, J.-C. Gomez Lavocat, C.-H. Ho, C. Parmeggiani, and D. S. Wiersma
Advanced Materials (2014), DOI: 10.1002/adma.201305008


Polarization-dependent perfect absorbers/reflectors based on a three-dimensional metamaterial
Xiong, X., Xue, Z.-H., Meng, C., Jiang, S.-C., Hu, Y.-H., Peng, R.-W., Wang, M.
Physical Review B, 2013, DOI: 10.1103/PhysRevB.88.115105

Complex Biocompatible pScaffolds for Studying of Cells Adhesion and Cells Migration within Three-Dimensional Environments
Pisanello, F., Sileo, L., Brunetti, V., Leménager, G., De Luca, E., Pompa, P. P., De Vittorio, M.
Conference on Micro and Nanoengineering, 2013

Mechanical characterization of a polymer microhelix in SEM environment
Alvo, S., Decanini, D., Couraud, L., Haghiri-Gosnet, A.-M., Hwang, G.
Conference on Micro and Nanoengineering, 2013

Two-photon direct laser writing in SU8 epoxy resin of a suspended microchannel resonant bio-mechanical sensor for liquid chemical analyses
Accoto, C., Qualtieri, A., Pisanello, F., Ricciardi, C., Pirri, F., De Vittorio, M., Rizzi, F.
Conference on Micro and Nanoengineering, 2013

Mechanical characterization of hollow ceramic nanolattices
Meza, L. R., Greer, J. R.
Journal of Materials Science, 2013, DOI: 10.1007/s10853-013-7945-x

Hollow metallic pyramid plasmonic structures fabricated by direct laser writing and electron beam evaporation
J. Mu, J. Li, W. Li, Q. Luo, C. Gu
Beijing National Laboratory for Condensed Matter Physics, Institution of Physics, Chinese Academy of Sciences, Beijing 100190, China, DOI: 10.1016/j.mee.2013.02.033 

In-chip fabrication of free-form 3D constructs for directed cell migration analysis
Mark Holm Olsen, Gertrud Malene Hjortø, Morten Hansen, Özcan Met, Inge Marie Svane and Niels B. Larsen
Lab on a Chip, 2013, 13, 4800-4809; DOI: 10.1039/c3lc50930c

Two-photon polymerization of sub-micrometric patterned surfaces: investigation of cell-substrate interactions and improved differentiation of neuron-like cells.
A. Marino, G. Ciofani, C. Filippeschi, M. Pellegrino, M. Pellegrini, P. Orsini, M. Pasqualetti, V. Mattoli, B. Mazzolai
ACS Appl Mater Interfaces, 5(24), 13012 (2013)

Transmission phase gratings fabricated with direct laser writing as color filters in the visible
M. Nawrot, Ł. Zinkiewicz, B. Włodarczyk, and P. Wasylczyk
Optics Express, 21, DOI:10.1364/OE.21.031919 (2013)

Hybrid Helical Magnetic Microrobots Obtained by 3D Template-Assisted Electrodeposition
M.A. Zeeshan, R. Grisch, E. Pellicer, K.M. Sivaraman, K.E. Peyer, J.  Sort, B. Özkale, M.S. Sakar, B.J. Nelson, S. Pané
Small, DOI: 10.1002/smll.201302856 (2013)

Dip-in depletion optical lithography of three-dimensional chiral polarizers
M. Thiel, J. Ott, A. Radke, J. Kaschke, and M. Wegener
Optics Letters 38, 4252 (2013)

Fabrication and Deformation of Three-Dimensional Hollow Ceramic Nanostructures
D. Jang, L.R. Meza, F. Greer, and J.R. Greer
Nature Materials 12, 893 (2013)

Fabrication and Characterization of Magnetic Microrobots for Three-Dimensional Cell Culture and Targeted Transportation
S. Kim, F. Qiu, S. Kim, A. Ghanbari, C. Moon, L. Zhang, B.J. Nelson, and H. Choi
Advanced Materials DOI: 10.1002/adma.201301484

Structured Metal Film as a Perfect Absorber
X. Xiong , S. Jiang , Y.Hu , R. Peng , and M. Wang
Advanced Materials DOI: 10.1002/adma.201300223

Preparation of Reactive Three-Dimensional Microstructures via Direct Laser Writing and Thiol-ene Chemistry
A.S. Quick,  J. Fischer, B. Richter, T. Pauloehrl, V.  Trouillet, M. Wegener, C. Barner-Kowollik
Macromolecular Rapid Communications, 34, 335 (2013)

Fabrication of mesoscale polymeric templates for three-dimensional disordered photonic materials
J. Haberko, and F. Scheffold
Optics Express 21, 1057 (2013)


On-chip two-photon polymerization of cell-sized 3D microenvironments for chemotaxis analysis
Larsen, N. B., Olsen, M. H., Hjortø, G. M., Met, Ö., Hansen, M., Svane, I. M.
38th International Conference on Micro and Nano Engineering, 2012

A Fabrication Technique of Three-Dimensional Nanochannel Bridges Without Nanolithography
Heo, Y. J., Sato, K., Takeuchi, S.
16th International Conference on Miniaturized Systems for Chemistry and Life Sciences, 2012

Force sensing with a shaped dielectric micro-tool
D.B. Phillips, et al.
Europhysics Letters 99, 58004
doi:10.1209/0295-5075/99/58004 (2012)

An optically actuated surface scanning probe
D.B. Phillips, G.M. Gibson, R. Bowman, M.J. Padgett, S. Hanna, D.M. Carberry, M.J. Miles, and
S. H. Simpson
Optics Express 20, 29679 (2012)

Visible light Laue diffraction from woodpile photonic crystals
B. Brüser, I. Staude, G. v. Freymann, M. Wegener, and U. Pietsch
Applied Optics 51, 6732 (2012)

Micro-Engineered 3D Scaffolds for Cell Culture Studies
A. M. Greiner, B. Richter, M. Bastmeyer
Macromolecular Bioscience 12, 1301 (2012)

Direct laser writing for nanoporous liquid core laser sensors
T. Grossmann, M. Brøkner Christiansen, J. Peterson, H. Kalt, T. Mappes, and A. Kristensen
Optics Express 20, 17467 (2012)

Wall-less liquid pathways formed with three-dimensional microring arrays
W. C. Lee, Y. J. Heo, and S. Takeuchi
Appl. Phys. Lett. 101, 114108 (2012)

3D Direct Laser Writing of Nano- and Microstructured Hierarchical Gecko-Mimicking Surfaces
M. Röhrig, M. Thiel, M. Worgull, and H. Hölscher
Small 19, 2918 (2012)

Direct laser writing-mediated generation of standardized topographies for dental implant surface optimization
R. Wittig, E. Waller, G. von Freymann, and R. Steiner
Journal of Laser Applications 24, 042011 (2012)

Photonic wire bonding: a novel concept for chipscale interconnects
N. Lindenmann, G. Balthasar, D. Hillerkuss, R. Schmogrow, M. Jordan, J. Leuthold, W. Freude, and C. Koos
Optics Express, Vol. 20, 17667 (2012)

Novel concept for three-dimensional polymer waveguides for optical on-chip interconnects
M. Schröder, M. Bülters, C. von Kopylow, R. B. Bergmann
J. Europ. Opt. Soc. Rap. Public., Vol 7, 12027 (2012)

Photonic Wire Bonds for Terabit/s Chip-to-Chip Interconnects
N. Lindenmann, G. Balthasar, D. Hillerkuss, R. Schmogrow, M. Jordan, J. Leuthold, W. Freude, C. Koos
Physics.Optics arXiv:1111.0651v1 (2011)

Simultaneous additive and subtractive three-dimensional nanofabrication using integrated two-photon polymerization and multiphoton ablation
W. Xiong, Y.S. Zhou, X.N. He, Y. Gao, M. Mahjouri-Samani, L. Jiang, T. Baldacchini, and Y.F. Lu
Light: Science & Applications (2012) 1, e6 (2012)

Tailored 3D mechanical metamaterials made by Dip-in Direct-Laser-Writing Optical Lithography
T. Bückmann, N. Stenger, M. Kadic, J. Kaschke, A. Frölich, T. Kennerknecht, C. Eberl, M. Thiel, and M. Wegener
Advanced Materials 24, 2710 (2012)

Spectral tuning of a three-dimensional photonic-bandgap waveguide signature by silica atomic-layer deposition
I. Staude, G. von Freymann, and M. Wegener
Optical Materials Express, 2, 629 (2012)

On the practicability of pentamode mechanical metamaterials
M. Kadic, T. Bückmann, N. Stenger, M. Thiel, and M. Wegener
Applied Physics Letters 100, 191901 (2012)

Tapered gold-helix metamaterials as improved circular polarizers
J. K. Gansel, M. Latzel, A . Frölich, J. Kaschke, M. Thiel, and M. Wegener
Applied Physics Letters 100, 101109 (2012)

Waveguides in three-dimensional photonic bandgap materials for particle-accelerator on a chip architectures
I. Staude, C. McGuinness, A. Frölich, R.L. Byer, E. Colby, and M. Wegener
Optics Express, Vol. 20, 5607 (2012)

Magnetic Helical Micromachines: Fabrication, Controlled Swimming, and Cargo Transport
S. Tottori , L. Zhang, * F. Qiu, K.K. Krawczyk, A. Franco-Obregón, and B.J. Nelson
Advanced Materials 24, 811 (2012)


Micro and nano-platforms for biological cell analysis
Svendsen, W. E., Castillo-León, J., Lange, J. M., Sasso, L., Olsen, M. H., Abadi, M., Andresen, L., Levinsen, S., Shah, P., Vedarethinam, I., Dimaki, M.
Sens. Actuators A: Phys., 2011, DOI: 10.1016/j.sna.2011.02.027

Ultralight metallic microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., Carter, W. B.
Science 334, 2011, DOI: 10.1126/science.12.11649

Microphotonic parabolic light directors fabricated by two-photon lithography
J.H. Atwater, P. Spinelli, E. Kosten, J. Parsons, C. Van Lare.
Appl. Physics Letters 99, 151113 (2011), doi: 10.1063/1.3648115

Photonic Waveguide Bonds - A Novel Concept for Chip-to-Chip Interconnects
N. Lindenmann, I. Kaiser, G. Balthasar, R. Bonk, D. Hillerkuss, W. Freude, J. Leuthold, and C. Koos
Optical Fiber Communication Conference, OSA Technical Digest (2011), paper PDPC1

Spectroscopic characterization of highly doped ZnO films grown by atomic-layer deposition for three-dimensional infrared metamaterials [Invited]
A. Frölich and M. Wegener
Optical Materials Express 1, 883 (2011)

Past achievements and future challenges in the development of three-dimensional photonic metamaterials
C.M. Soukoulis and M. Wegener
Nature Photonics 5, 523-530 (2011)

Direct laser writing for active and passive high-Q polymer microdisks on silicon
T. Grossmann, S. Schleede, M. Hauser, T. Beck, M. Thiel, G. von Freymann, T. Mappes, and H. Kalt
Optics Express 19, 11451 (2011)

Wenn das Licht den Dreh raus hat. Künstliche chirale Materialien
M. Thiel, J.K. Gansel, M. Wegener, and G. von Freymann
Physik in unserer Zeit 42, 70 (2011)

Two-Component Polymer Scaffolds for Controlled Three-Dimensional Cell Culture
F. Klein, B. Richter, T. Striebel, C.M. Franz, G. von Freymann, M. Wegener, and M. Bastmeyer
Advanced Materials, 23, 1341 (2011)

Waveguides in three-dimensional photonic-bandgap materials by direct laser writing and silicon double inversion
I. Staude, G. von Freymann, S. Essig, K. Busch and M. Wegener
Optics Letters 36, 67 (2011)


Controlled Ag Electroless Deposition in Bulk Structures with Complex Three-Dimensional Profiles
Malureanu, R., Zalkovskij, M., Andryieuski, A., Lavrinenko, A. V.
J. Electrochem. Soc., 2010, DOI: 10.1149/1.3502640

The Materials Challenge in Diffraction-Unlimited Direct-Laser-Writing Optical Lithography
Fischer, J., von Freymann, G., Wegener, M.
Adv. Mater., 22, 2010, DOI: 10.1002/adma.201000892

Bianisotropic Photonic Metamaterials
Kriegler, C. E., Rill, M. S., Linden, S., Wegener, M.
IEEE Journal of Selected Topics in Quantum Electronics, 2010, DOI: 10.1109/JSTQE.2009.2020809

Direct laser writing of three-dimensional nanostructures using a continuous-wave laser at 532nm
M. Thiel, J. Fischer, G. von Freymann and M. Wegener
Applied Physics Letters 97, 221102 (2010)

Shaping Optical Space with Metamaterials
M. Wegener and S. Linden
Physics Today 63(10), 32 (2010)

Dreidimensionale optische Tarnkappe realisiert
N. Stenger, T. Ergin and M. Wegener
Physik in unserer Zeit 41, 218 (2010)

Rhombicuboctahedral three-dimensional photonic quasicrystals
A. Ledermann, M. Wegener and G. von Freymann
Adv. Mater. 22, 2363 (2010)

Three-dimensional invisibility cloak at optical wavelengths
T. Ergin, N. Stenger, P. Brenner, J. B. Pendry and M. Wegener
Science 328, 337-339 (2010)

Three-dimensional nanostructures for photonics
G. von Freymann, A. Ledermann, M. Thiel, I. Staude, S. Essig, K. Busch and M. Wegener
Adv. Funct. Mater. 20, 1038-1052 (2010)

Fabrication and characterization of silicon woodpile photonic crystals with a complete bandgap at telecom wavelengths
I. Staude, M. Thiel, S. Essig, C. Wolff, K. Busch, G. von Freymann and M. Wegener
Opt. Lett. 35, 1094-1096 (2010)

Elastic fully three-dimensional microstructure scaffolds for cell force measurements
F. Klein, T. Striebel, J. Fischer, Z. Jiang, C. M. Franz, G. von Freymann, M. Wegener and M. Bastmeyer
Adv. Mater. 22, 868-871 (2010)

Three-dimensional chiral photonic superlattices
M. Thiel, H. Fischer, G. von Freymann and M. Wegener
Opt. Lett. 35, 166-168 (2010)


Transition between corrugated metal films and split-ring-resonator arrays
C.E. Kriegler, M.S. Rill, M. Thiel, E. Müller, S. Essig, A. Frölich, G. von Freymann, S. Linden, D. Gerthsen, H. Hahn, K. Busch, and M. Wegener
Appl. Phys. B 96, 749 (2009)

Three-dimensional bi-chiral photonic crystals
M. Thiel, M.S. Rill, G. von Freymann, and M. Wegener
Adv. Mater. 21, 4680-4682 (2009)

Multiple scattering of light in three-dimensional photonic quasicrystals
A. Ledermann, D.S. Wiersma, M. Wegener, and G. von Freymann
Opt. Express 17, 1844 (2009)

Negative-index bianisotropic photonic metamaterial fabricated by direct laser writing and silver shadow evaporation
M.S. Rill, C.E. Kriegler, M. Thiel, G. von Freymann, S. Linden, and M. Wegener
Opt. Lett. 34, 19-21 (2009)

Structure−activity relationship in D-π-A-π-D-based photoinitiators for the two-photon-induced photopolymerization process
N. Pucher, A. Rosspeintner, V. Satzinger, V. Schmidt, G. Gescheidt, J. Stampfl and R. Liska
Macromolecules 42, 6519-6528 (2009)

Gold helix photonic metamaterial as broadband circular polarizer
J.K. Gansel, M. Thiel, M.S. Rill, M. Decker, K. Bade, V. Saile, G. von Freymann, S. Linden, and M. Wegener
Science 325, 1513-1515 (2009)


Three-Dimensional Photonic Band Gap Structures Made by Direct Laser Writing and Silicon Single-Inversion
Hermatschweiler, M., Thiel, M., Wegener, M.
Conference on Lasers and Electro-Optics/Quantum Electronics and Laser Science Conference and Photonic Applications Systems Technologies, 2008, DOI: 10.1109/CLEO.2008.4551904

Spatially localized photoluminescence at 1.5 micrometers wavelength in direct laser written 3D structures
S. Wong, O. Kiowski, M. Kappes, J.K. Lindner, N. Mandal, F.C. Peiris, G.A. Ozin, M. Thiel, M. Braun, M. Wegener, and G. von Freymann
Adv. Mater. 20, 4097-4102 (2008)

Photonic metamaterials by direct laser writing and silver chemical vapour deposition
M.S. Rill, C. Plet,  M. Thiel, I. Staude,  G. v. Freymann, S. Linden, and M. Wegener
Nature Mater. 7, 543-546 (2008)
Related Articles: Pro-Physik (May 08), Materials Today (July 08), MRS Bulletin (Sept. 08)


Layer-by-layer three-dimensional chiral photonic crystals
M. Thiel, G. von Freymann, and M. Wegener
Opt. Lett. 32, 2547-2549 (2007)

Highly Selective Wet Etch for High-Resolution Three-Dimensional Nanostructures in Arsenic Sulfide All-Inorganic Photoresist
S. H. Wong, M. Thiel, P. Brodersen, D. Fenske, G. A. Ozin, M. Wegener, and G. von Freymann
Chem. Mater. 19 (17), 4213-4221 (2007)

Fabrication of Silicon Inverse Woodpile Photonic Crystals
M. Hermatschweiler, A. Ledermann, G. A. Ozin, M. Wegener, and G. von Freymann
Adv. Funct. Mater. 17, 2273-2277 (2007)

Thin-film polarizer based on a 1D-3D-1D photonic crystal heterostructure
M. Thiel, M. Hermatschweiler, M. Wegener, and G. von Freymann
Appl. Phys. Lett. 91, 123515 (2007)

Polarization Stop Bands in Chiral Polymeric Three-Dimensional Photonic Crystals
M. Thiel, M. Decker, M. Deubel, M. Wegener, S. Linden, and G. von Freymann
Adv. Mater. 19, 207 (2007)


Three-dimensional silicon inverse photonic quasicrystals for infrared wavelengths
A. Ledermann, L. Cademartiri, M. Hermatschweiler, C. Toninelli, G. A. Ozin, D. S. Wiersma, M. Wegener, and G. von Freymann
Nature Mater. 5, 942 (2006)

3D-2D-3D Photonic Crystal Heterostructures Fabricated by Direct Laser Writing
M. Deubel, M. Wegener, S. Linden, G. von Freymann, and S. John
Opt. Lett. 31, 805-807 (2006)

New Route to Three-Dimensional Photonic Bandgap Materials: Silicon Double Inversion of Polymer Templates
N. Tétreault, G. von Freymann, M. Deubel, M. Hermatschweiler, F. Pérez-Willard, S. John, M. Wegener, G. A. Ozin
Adv. Mater. 18, 457-460 (2006)

Direct Laser Writing of Three-Dimensional Photonic Crystals with a Complete Photonic Bandgap in Chalcogenide Glasses
S. Wong, M. Deubel, F. Pérez-Willard, S. John, G. A. Ozin, M. Wegener, and G. von Freymann
Adv. Mater. 18, 265-269 (2006)


Angle-resolved transmission spectroscopy of three-dimensional photonic crystals fabricated by direct laser writing

M. Deubel, M. Wegener, S. Linden, and G. von Freymann
Appl. Phys. Lett. 87, 221104 (2005)


Direct laser writing and characterization of “Slanted Pore” Photonic Crystals
M. Deubel, M. Wegener, A. Kaso, and S. John
Appl. Phys. Lett. 85, 1895 (2004)

Direct Laser Writing of Three-Dimensional Photonic Crystal Templates for Telecommunications
M. Deubel, G. von Freymann, M. Wegener, S. Pereira, K. Busch, and C.M. Soukoulis
Nature Mater. 3, 444 (2004)